INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT SECURITY INDICATOR LIGHT ASSEMBLY |
![]() ![]() |
Apply battery voltage between the terminals of the indicator, and check the illumination of the security indicator light.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Illuminates
- NOTICE:
- If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator light will not illuminate.
- If the voltage is too low, the security indicator light will not illuminate.
- If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator light will not illuminate.


