INSTALLATION
Removal / installation · Vehicles built from Jun 2011
| 1. INSTALL FRONT EXHAUST PIPE SUB-ASSEMBLY |
Temporally install the pipe support and clamp with the bolt.
Install a new gasket to the exhaust manifold.
Install the front exhaust pipe to the exhaust manifold with the 3 nuts. Alternately tighten the bolts in several passes.
- Torque:
- 62 N*m{ 632 kgf*cm , 46 ft.*lbf }
Install the stay to the transmission with the 2 bolts.
- Torque:
- 71 N*m{ 724 kgf*cm , 52 ft.*lbf }
Install the clamp with the bolt.
- Torque:
- 19 N*m{ 194 kgf*cm , 14 ft.*lbf }
| 2. INSTALL NO. 2 FRONT EXHAUST PIPE SUB-ASSEMBLY |
Using a vernier caliper, measure the free length of the compression spring.

- Minimum length:
- 40 mm (1.57 in.)
Install the No. 2 front pipe to the pipe support.
Install a new gasket to the No. 2 front exhaust pipe.

- HINT:
- Using a plastic-faced hammer, uniformly strike the gasket so that the gasket and No. 2 front exhaust pipe are properly fit.
- NOTICE:
- Be careful with the installation direction of the gasket.
- Be careful with the installation direction of the gasket.
- Do not reuse the gasket.
- Do not reuse the gasket.
- To ensure a proper seal, do not use the front pipe to force the gasket onto the No. 2 front exhaust pipe.
- To ensure a proper seal, do not use the front pipe to force the gasket onto the No. 2 front exhaust pipe.
Install the No. 2 front pipe with the 2 compression springs and 2 bolts. Alternately tighten the bolts in several passes.
- Torque:
- 43 N*m{ 438 kgf*cm , 32 ft.*lbf }
| 3. INSTALL CENTER EXHAUST PIPE ASSEMBLY |
Install the center pipe to the 3 pipe supports.
Install a new gasket and the center pipe to the No. 2 front pipe with the 2 bolts and 2 nuts. Alternately tighten the bolts in several passes.
- Torque:
- 43 N*m{ 438 kgf*cm , 32 ft.*lbf }
| 4. INSTALL TAILPIPE ASSEMBLY |
Install the tailpipe to the pipe support.
Install a new gasket and the tailpipe to the center pipe with the 2 bolts and 2 nuts. Alternately tighten the bolts in several passes.
- Torque:
- 43 N*m{ 438 kgf*cm , 32 ft.*lbf }
