INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT INTAKE MANIFOLD |
 |
Using a precision straightedge and feeler gauge, measure the surface contacting the cylinder head for warpage.
- Maximum warpage:
- 0.40 mm (0.0157 in.)
If the warpage is greater than the maximum, replace the manifold.
| INSPECT EXHAUST MANIFOLD |
 |
Using a precision straightedge and feeler gauge, measure the surface contacting the cylinder head for warpage.
- Maximum warpage:
- 0.40 mm (0.0157 in.)
If the warpage is greater than the maximum, replace the manifold.