INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT SEAT HEATER SWITCH LH |
Measure the resistance of the seat heater switch when the switch is operated.

- Standard resistance:
Tester Connection
Switch Condition
Specified Condition
3 (IG) - 4 (LH)
ON
Below 1 Ω
3 (IG) - 4 (LH)
OFF
10 kΩ or high
Check that the seat heater switch indicator light illuminates when the switch is operated.
- OK:
Tester Connection
Switch Condition
Specified Condition
Battery positive (+) → 3 (IG)
Battery negative (-) → 6 (E)
ON
Illuminates
Check that the seat heater switch illuminates.
- OK:
Tester Connection
Switch Condition
Specified Condition
Battery positive (+) → 1 (ILL+)
Battery negative (-) → 2 (ILL-)
Always
Illuminates
| INSPECT SEAT HEATER SWITCH RH |
Measure the resistance of the seat heater switch when the switch is operated.

- Standard resistance:
Tester Connection
Switch Condition
Specified Condition
3 (IG) - 4 (RH)
ON
Below 1 Ω
3 (IG) - 4 (RH)
OFF
10 kΩ or high
Check that the seat heater switch indicator light illuminates when the switch is operated.
- OK:
Tester Connection
Switch Condition
Specified Condition
Battery positive (+) → 3 (IG)
Battery negative (-) → 6 (E)
ON
Illuminates
Check that the seat heater switch illuminates.
- OK:
Tester Connection
Switch Condition
Specified Condition
Battery positive (+) → 1 (ILL+)
Battery negative (-) → 2 (ILL-)
Always
Illuminates
