2014 Hilux · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE SWITCH BASE

B278245
  1. Detach the 8 claws.

    HINT:
    If the claws are difficult to detach, detach the claws from the back of the switch base.

  1. Disconnect the connectors and remove the switch base..


3. REMOVE SEAT HEATER SWITCH LH
  1. Detach the 2 claws and remove the switch.


4. REMOVE SEAT HEATER SWITCH RH
  1. Detach the 2 claws and remove the switch.

← COMPONENTS (from Jun 2011)REMOVAL (Aug 2012 – Jul 2013) →