2014 Hilux · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. REMOVE STARTER YOKE ASSEMBLY

  1. A115884E01
    Remove the nut and disconnect the lead wire from terminal C.

  1. Remove the 2 through bolts.

  1. Pull out the starter yoke together with the armature.

  1. Remove the felt washer from the armature.


2. REMOVE STARTER CLUTCH SUB-ASSEMBLY

  1. A102626
    Remove the 3 screws and magnet starter switch assembly.

  1. Remove the return spring, idler gear, clutch roller, retainer and starter clutch assembly from the starter drive housing.

    A122572E02

  1. A197146E02
    Using a magnet hand, remove the steel ball from the clutch shaft hole.


3. REMOVE STARTER BRUSH HOLDER ASSEMBLY

  1. A102628
    Remove the 2 screws and commutator end frame from the starter yoke.

  1. A102629
    Disconnect the 4 starter brushes from the starter brush holder.

    1. Using a screwdriver, pull back the spring.

    2. Disconnect the brush from the brush holder.

  1. Remove the starter brush holder from the starter yoke.


4. REMOVE STARTER ARMATURE ASSEMBLY
← REMOVAL (from Aug 2013)INSPECTION (from Jun 2011) →