2014 Hilux · Service Manual BODY ELECTRICAL

01-E0 Registration Complete Indication Error

Diagnostic trouble codes · Vehicles built Jun 2011 – Jul 2013

Also covers:

DESCRIPTION

DTC Code
DTC Detection Condition
Trouble Area
01-E0
"Registration complete" signal from the master device cannot be received.
-
01-E3
The registration demand signal from the slave device is output, or the registration demand signal is output by receiving a connection confirmation signal from the sub-master device.
-
01-E4
The multiple frame transmission is incomplete.
-

HINT:
Even if no fault is present, this trouble code may be stored depending on the battery condition or engine start voltage.


INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs. These DTCs do not indicate a malfunction.


← 01-21 ROM Error (+ 5 more codes) (Aug 2012 – Jul 2013)01-E2 ON / OFF Indication Parameter Error (Jun 2011 – Jul 2012) →