REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE SWITCH BASE |
![]() ![]() |
Detach the 8 claws.
- HINT:
- If the claws are difficult to detach, detach the claws from the back of the switch base.
Disconnect the connectors and remove the switch base..
| 2. REMOVE VSC OFF SWITCH |
Disconnect the VSC OFF switch connector.

Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the switch base.
- HINT:
- Tape the screwdriver tip before use.

