INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL LIGHT CONTROL RHEOSTAT |
Install the light control rheostat with the nut.
| 2. INSTALL LIGHT CONTROL RHEOSTAT KNOB |
Attach the claw to install the light control rheostat knob.
| 3. INSTALL NO. 1 SWITCH HOLE BASE |
Attach the 5 claws to install the No. 1 switch hole base.
