2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL ELECTRIC VACUUM REGULATING VALVE

  1. A151139
    Install the electric vacuum regulating valve with bracket with the 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. A151138
    Connect the 4 vacuum hoses.

    NOTICE:
    Install the vacuum hoses so that they completely cover the pipes.

  1. A151137
    Connect the connector.


2. INSTALL GAS FILTER

  1. A151136
    Install the gas filter with bracket with the bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the 2 vacuum hoses.

    NOTICE:
    Install the vacuum hoses so that they completely cover the pipes.


3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

A135916
  1. Install the engine cover with the 3 bolts and 2 nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

← INSTALLATION (Aug 2012 – Jul 2013)COMPONENTS (from Jun 2011) →