FAIL-SAFE CHART
System information · Vehicles built from Jun 2011
| FAIL-SAFE FUNCTION |
When communication fails in any of the main wires (communication lines) due to a short circuit or other causes, the fail-safe function, which is specified for each system, operates to prevent the system from malfunctioning.
The table below shows the effects on each system when communication is impossible. For further details, refer to each system.
Function
ECM
Skid Control ECU
Steering Angle Sensor
Yaw Rate Sensor
Action when unable to communicate
DTC detection (Driver detectable)
VSC Control
(Controls driving force while VSC operates, controls VSC/TRC engine output)
○
●
○
○
VSC function stops
Detectable (Light comes on)
- HINT:
- ●: Control master
- ○: Related system
- ●: Control master