2014 Hilux · Service Manual HEATER & AIR CONDITIONING SYSTEM

REASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. INSTALL COOLER DRYER

E184466E01
  1. Using pliers, install a new cooler dryer to the modulator.

    Text in Illustration 
    *1
    Modulator

  1. E101932
    Apply sufficient compressor oil to a new O-ring and the cap fitting surface.

    Compressor oil:
    ND-OIL 8 or equivalent

  1. E184465
    Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.

    Torque:
    2.9 N*m{ 30 kgf*cm , 26 in.*lbf }


2. INSTALL NO. 3 COOLER CONDENSER BRACKET
  1. Install the No. 3 cooler condenser bracket with the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


3. INSTALL NO. 2 COOLER CONDENSER BRACKET
  1. Install the No. 2 cooler condenser bracket with the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


4. INSTALL NO. 1 COOLER CONDENSER BRACKET
  1. for Driver Side:
    Install the No. 1cooler condenser bracket with the 2 bolts.

    Torque:
    3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

  1. for Passenger Side:
    Install the No. 1cooler condenser bracket with the 2 bolts.

    Torque:
    3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← DISASSEMBLY (from Jun 2011)INSTALLATION (from Jun 2011) →