REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- For vehicles with SRS:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE STEERING COLUMN LOWER COVER
|
 |
Remove the 3 screws and cover lower.
| 3.
REMOVE STEERING COLUMN UPPER COVER
|
 |
Remove the 3 screws and cover lower.
| 4.
REMOVE TRANSPONDER KEY AMPLIFIER |
 |
- Using a screwdriver, widen the claw attached to the upper bracket by approximately 1.0 mm (0.039 in.).
Pull out the transponder key amplifier with the claw open.
Disconnect the amplifier connector and remove the transponder key amplifier.