ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2011
| REMOVE MIRROR HEATER RELAY |
![]() ![]() |
Remove the mirror heater relay from the relay block No. 3.
| INSPECT MIRROR HEATER RELAY |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
3 - 5
Battery voltage applied to terminals 1 and 2
Below 1 Ω
Battery voltage not applied to terminals 1 and 2
10 kΩ or higher
| INSTALL MIRROR HEATER RELAY |
Install the mirror heater relay to the relay block No. 3.


