REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH |
Extend the headlight washer nozzle by hand.

- NOTICE:
- Be careful not to damage the headlight washer actuator sub-assembly or headlight washer nozzle sub-assembly LH.
Detach the 2 claws and remove the type 1 headlight washer nozzle sub-assembly LH.

| 2. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
