2014 Hilux · Service Manual CRUISE CONTROL SYSTEM

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT CRUISE CONTROL MAIN SWITCH

  1. Measure the resistance according to the value(s) in the table below.

    B215369E15

    Text in Illustration 
    *a
    Component without harness connected
    (Cruise Control Main Switch)
    -
    -

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (ECC) - 3 (CCS)
    Neutral
    1 MΩ or higher
    1 (ECC) - 3 (CCS)
    +RES
    235 to 245 Ω
    1 (ECC) - 3 (CCS)
    -SET
    617 to 643 Ω
    1 (ECC) - 3 (CCS)
    CANCEL
    1509 to 1571 Ω
    1 (ECC) - 3 (CCS)
    Main switch off
    1 MΩ or higher
    1 (ECC) - 3 (CCS)
    Main switch on
    Below 2.5 Ω

    If the result is not as specified, replace the cruise control main switch.

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →