ON-VEHICLE INSPECTION
Inspection · Vehicles built Jun 2011 – Jul 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| CHECK CURTAIN SHIELD AIRBAG ASSEMBLY LH (VEHICLE NOT INVOLVED IN COLLISION) |
Perform a diagnostic system check (Click here).
With the curtain shield airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the curtain shield airbag assembly with a new one:
Cuts, minute cracks or marked discoloration on the curtain shield airbag assembly top surface or in the grooved portion.
| CHECK CURTAIN SHIELD AIRBAG ASSEMBLY LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) |
Perform a diagnostic system check (Click here).
With the curtain shield airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the curtain shield airbag assembly with a new one:
- Cuts, minute cracks, or marked discoloration on the curtain shield airbag assembly.
- Cracks or other damage to the connectors.
- Deformation or cracks in the curtain shield airbag assembly contact plate.
- CAUTION:
- For removal and installation of the curtain shield airbag assembly, be sure to follow the correct procedure.
- Cuts, minute cracks, or marked discoloration on the curtain shield airbag assembly.
