2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. REMOVE NO. 2 ENGINE UNDER COVER

2. DRAIN ENGINE OIL
  1. Remove the oil filler cap.

  1. Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

  1. Wipe the oil pan and drain plug.

  1. Install a new gasket and the oil pan drain plug.

    Torque:
    34 N*m{ 347 kgf*cm , 25 ft.*lbf }


3. REMOVE ENGINE OIL LEVEL SENSOR
  1. Disconnect the engine oil level sensor connector.

  1. Remove the 4 bolts and engine oil level sensor.

← COMPONENTS (from Jun 2011)INSPECTION (from Jun 2011) →