2014 Hilux · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT BLOWER RESISTOR

E228821
  1. Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      3 - 4
      Always
      1.49 to 1.67 Ω
      1 - 4
      Always
      3.12 to 3.60 Ω
      2 - 4
      Always
      0.52 to 0.60 Ω

      If the result is not as specified, replace the blower resistor.
      Text in Illustration 
      *a
      Component without harness connected
      (Blower Resistor)

← REMOVAL (from Jun 2011)INSTALLATION (from Jun 2011) →