REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL |
![]() ![]() |
Remove the clip <C>.
Detach the 2 claws and 3 guides and remove the No. 1 instrument cluster finish panel.
| 2. REMOVE COMBINATION METER ASSEMBLY |
![]() ![]() |
Remove the 3 screws.
Disconnect the connectors, detach the clamp and remove the combination meter.
| 3. REMOVE MAGNET CLUTCH RELAY |
![]() ![]() |
Remove the magnet clutch relay.




