REMOVAL
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
REMOVE COMBINATION METER ASSEMBLY |
 |
(Click here)
| 2.
REMOVE LIGHT CONTROL SWITCH HOLE COVER |
 |
- Disconnect the connector.
Detach the 2 claws and guide underneath the upper instrument panel sub-assembly by hand, and remove the light control switch hole cover
| 3.
REMOVE AUTOMATIC LIGHT CONTROL SENSOR |
 |
- Detach the 2 claws and remove the automatic light control sensor.