2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT COMMON RAIL ASSEMBLY

  1. A075928E02
    Inspect the fuel pressure sensor.
    Text in Illustration 
    *a
    Component without harness connected
    (Common Rail)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      2 - 3
      25°C (77°F)
      16.4 kΩ or less
      5 - 4
      25°C (77°F)
      16.4 kΩ or less
      1 - 2
      25°C (77°F)
      3 kΩ or less
      6 - 5
      25°C (77°F)
      3 kΩ or less

      If the result is not as specified, replace the common rail assembly.

  1. Inspect the pressure discharge valve.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      0.96 to 1.16 Ω

      If the result is not as specified, replace the common rail assembly.

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →