ADJUSTMENT
Removal / installation · Vehicles built from Jun 2011
| 1. ADJUST CLUTCH SWITCH ASSEMBLY |
Loosen the adjusting nut.
Adjust the switch position so that the clearance labeled A in the illustration, between the clutch switch and cushion, is within the specified range. Then, tighten the adjusting nut.

- Standard Clearance A:
- 0.6 to 1.0 mm (0.0236 to 0.0394 in.)
- Torque:
- 16 N*m{ 160 kgf*cm , 12 ft.*lbf }
- NOTICE:
- Before performing the clutch switch assembly adjustment, adjust the pedal free play (Click here).
