DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1.
REMOVE HEADLIGHT SOCKET COVER |
 |
Remove the headlight socket cover.
| 2.
REMOVE NO. 1 HEADLIGHT BULB |
 |
- Release the lock of the set spring and remove the No. 1 headlight bulb.
| 3.
REMOVE FRONT TURN SIGNAL LIGHT SOCKET |
 |
- Turn the front turn signal light socket in the direction indicated by the arrow in the illustration and remove it.
| 4.
REMOVE FRONT TURN SIGNAL LIGHT BULB |
 |
Remove the front turn signal light bulb from the front turn signal light socket.
| 5.
REMOVE CLEARANCE LIGHT SOCKET |
 |
- Turn the clearance light socket in the direction indicated by the arrow in the illustration and remove it.
| 6.
REMOVE CLEARANCE LIGHT BULB |
 |
Remove the clearance light bulb from the clearance light socket.
| 7.
REMOVE HEADLIGHT BRACKET LH |
 |
- Remove the 1 or 2 screws and headlight bracket LH.
- HINT:
- There are 1 or 2 screws depending on the date of manufacture.