INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT AIR FUEL RATIO SENSOR |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 (HAF2) - 2 (+B)
20°C (68°F)
1.8 to 3.4 Ω
1 (HAF2) - 4 (AF2-)
Always
10 kΩ or higher
If the result is not as specified, replace the air fuel ratio sensor.Text in Illustration *a
Component without harness connected
(Air Fuel Ratio Sensor)
