2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET
  1. Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


2. INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET
  1. Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


3. INSTALL GLOW PLUG CONTROLLER
  1. for LHD:
    Install the glow plug controller with the nut and bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    for RHD:
    Install the glow plug controller with the 2 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the 4 connectors and clamp.


4. INSTALL BATTERY AND BATTERY TRAY

5. INSTALL BATTERY BRACKET

6. CONNECT CABLE TO BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← REMOVAL (from Aug 2013)INSTALLATION (Aug 2012 – Jul 2013) →