REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
DISCONNECT CABLE FROM BATTERY TERMINAL |
 |
- NOTICE:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE BATTERY BRACKET |
|
| 3.
REMOVE BATTERY AND BATTERY TRAY |
|
| 4.
REMOVE GLOW PLUG CONTROLLER |
 |
Disconnect the 4 connectors.
Text in Illustration
*A
|
for LHD
|
*B
|
for RHD
|
for LHD:
Remove the bolt, nut and glow plug controller from the vehicle.
for RHD:
Remove the 2 bolts and glow plug controller from the vehicle.
| 5.
REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET |
 |
Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.
| 6.
REMOVE NO. 2 GLOW PLUG CONTROLLER BRACKET |
 |
Remove the 2 screws and No. 2 glow plug controller bracket from the glow plug controller.