REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE GLOW PLUG CONTROLLER (for LHD) |
 |
(Click here)
| 3.
REMOVE INJECTOR DRIVER ASSEMBLY |
 |
for LHD:
- Disconnect the 4 connectors.
Remove the 2 bolts and injector driver assembly.
for RHD:
- Disconnect the 4 connectors and detach the wire harness clamp.
Remove the 3 bolts and injector driver assembly.
| 4.
REMOVE INJECTOR DRIVER BRACKET |
 |
- Remove the 4 screws and injector driver bracket.
Text in Illustration
*A
|
for LHD
|
*B
|
for RHD
|