2014 Hilux · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jun 2011


1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

  1. B277362E01
    Tie the string that was passed through the engine compartment to the end of the hood lock control cable as shown in the illustration.

    HINT:
    Use a length of string long enough to pass through the engine compartment.

    Text in Illustration 
    *1
    String

  1. Pass the hood lock control cable through the vehicle body, and then attach the grommet and each clamp.

  1. Untie the string from the hood lock control cable.

    B277363E01

    Text in Illustration 
    *1
    Hood Lock Control Cable
    *2
    Grommet


2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
  1. Connect the hood lock control cable to the hood lock control lever.

  1. Attach the 3 claws to install the hood lock control lever.


3. INSTALL HOOD LOCK ASSEMBLY
  1. Connect the hood lock control cable to the hood lock control lever.

  1. Attach the 3 claws to install the hood lock control lever.


4. INSTALL RADIATOR GRILLE
  1. Attach the 6 claws to install the radiator grille.

  1. Install the 2 screws and 2 clips.

← REMOVAL (from Jun 2011)COMPONENTS (from Jun 2011) →