INSTALLATION
Removal / installation · Vehicles built from Jun 2011
| 1. INSTALL REAR BODY TAIL GATE ASSEMBLY |
Install the rear body tail gate with the 2 bolts.
- Torque:
- 59 N*m{ 602 kgf*cm , 44 ft.*lbf }
w/ Wire Harness:
Pass the wire harness through the vehicle body.
Connect the connector and attach the 2 claws.
| 2. INSTALL TAIL GATE STAY ASSEMBLY |
- HINT:
- Use the same procedure for both tail gate stays.
Install the tail gate stay with the 2 screws.

- Torque:
- 27 N*m{ 275 kgf*cm , 20 ft.*lbf }
