2014 Hilux · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH

B284745E01
  1. Check the front seat cushion heater assembly LH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A-2 - B-1
      Seat cushion heater temperature 20°C (68°F)
      7.2 to 8.8 Ω
      B-1 - B-2
      A-2 - B-2
      Below 1 Ω
      A-1 - B-1

      If the result is not as specified, replace the front seat cushion heater assembly LH.
      Text in Illustration 
      *1
      Connector A
      *2
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater Assembly LH)


INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

B284745E01
  1. Check the front seat cushion heater assembly RH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A-2 - B-1
      Seat cushion heater temperature 20°C (68°F)
      7.2 to 8.8 Ω
      B-1 - B-2
      A-2 - B-2
      Below 1 Ω
      A-1 - B-1

      If the result is not as specified, replace the front seat cushion heater assembly RH.
      Text in Illustration 
      *1
      Connector A
      *2
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater Assembly RH)

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →