OUTLINE
The 2KD-FTV High Version TOYOTA Direct injection 4 stroke common-rail Diesel engine (D-4D) is an in-line 4-cylinder, 2.5-liter, 16-valve DOHC, turbocharged diesel engine. This engine uses the direct injection system and common-rail system to achieve high performance, clean emissions, low noise and low vibrations.
An intercooler is provided on the models compliant with EURO 4 emission regulations. This lowers the intake air temperature and improves power output.
SPECIFICATION
| Engine Type | 2KD-FTV High Version | |||
| w/ Intercooler | w/o Intercooler | |||
| No. of Cyls. and Arrangement | 4-cylinder, In-line | ← | ||
| Valve Mechanism | 16-valve DOHC, Belt and Gear Drive | ← | ||
| Combustion Chamber | Direct Injection Type | ← | ||
| Manifolds | Cross-flow | ← | ||
| Fuel System | Common-rail Type | ← | ||
| Displacement | 2494 cm3 (152.2 cu. in.) | ← | ||
| Bore x Stroke | 92.0 mm x 93.8 mm (3.62 in. x 3.69 in.) | ← | ||
| Compression Ratio | 17.4 : 1 | 18.5 : 1 | ||
| Max. Output (EEC) | 88 kW @ 3600 rpm | 75 kW @ 3600 rpm | ||
| Max. Torque (EEC) | 325 N*m @ 2000 rpm | 260 N*m @ 1600 to 2400 rpm | ||
| Valve Timing | Intake | Open | 2° BTDC | ← |
| Closed | 31° ABDC | ← | ||
| Exhaust | Open | 30° BBDC | ← | |
| Closed | 0° ATDC | ← | ||
| Firing Order | 1 - 3 - 4 - 2 | ← | ||
| Fuel Cetane Number | 48 or higher | ← | ||
| Emission Regulation | EURO 4*1 | EURO 3*2 | ||
| EURO 2*3 | ||||
| EURO 1*4 | ||||
| Tier 1*5 | ||||
| -*6 | ||||
| Engine Service Mass (Reference)*7 | 243 kg (536 lb) | 235 kg (518 lb) | ||
*1: TASA made models (except models for Brazil, Colombia, Peru, high altitude countries and export package) and Models for Chile
*2: TMT made models (except models for Colombia, Ecuador, Chile, high altitude countries and export package) and Models for Peru
*3: Models for Colombia
*4: Models for Ecuador
*5: Models for Brazil
*6: Models for high altitude countries and export package
*7: Weight shows the figure with oil and water fully filled.
MAIN FEATURES
This engine has been able to achieve the following performance through the use of the items listed below:
High performance and fuel economy
Low noise and vibration
Lightweight and compact design
Good serviceability
Clean emissions
| Item | (1) | (2) | (3) | (4) | (5) | |
|---|---|---|---|---|---|---|
| Engine Proper | A cylinder head cover made of plastic is used. | - | - | ○ | - | - |
| A cylinder head made of aluminum alloy is used. | - | - | ○ | - | - | |
| A piston provided with combustion chamber is used. | ○ | ○ | - | - | ○ | |
| A passage for the EGR is provided in the cylinder head. | - | - | - | - | ○ | |
| Valve Mechanism | An intake camshaft is driven by a timing belt, and an exhaust camshaft is driven by a gear. | - | ○ | ○ | - | - |
| An automatic tensioner is provided for the timing belt. | - | - | - | ○ | - | |
| Cooling System | Toyota Genuine Super Long Life Coolant (SLLC) is used. | - | - | - | ○ | - |
| Intake and Exhaust System | A diesel throttle valve is used. | ○ | ○ | - | - | ○ |
| A swirl control valve is used.*1 | ○ | ○ | - | - | ○ | |
| An intercooler is used.*1 | ○ | - | - | - | ○ | |
| Fuel System | An HP3 type supply pump is used. | ○ | ○ | ○ | - | - |
| A common-rail type fuel injection system is used. | ○ | ○ | - | - | ○ | |
| An injector is provided in the bore center. | ○ | ○ | - | - | ○ | |
| Compensation values and Quick Response (QR) codes are used. | ○ | ○ | - | - | ○ | |
| A fuel cooler is used.*1 | ○ | - | - | - | - | |
| Serpentine Belt Drive System | A serpentine belt drive system is used. | - | - | - | ○ | - |
| Engine Control System | An intake mass air flow meter is used.*2 | ○ | - | - | - | ○ |
| Non-contact sensors are used as the accelerator pedal position sensor and diesel throttle valve position sensor. | ○ | - | - | - | ○ | |
| A pilot injection control system is used. | - | ○ | - | - | ○ | |
| A swirl control is used.*1 | ○ | - | - | - | - | |
| Emission Control System | An EGR system is used.*2 | - | - | - | - | ○ |
| An EGR cooler with bypass is used.*1 | - | - | - | - | ○ | |
| An oxidation catalyst is used.*3 | - | - | - | - | ○ | |
*1: Models compliant with EURO 4 emission regulations
*2: Models compliant with EURO 4, EURO 3, EURO 2, EURO 1 and Tier 1 emission regulations
*3: Models compliant with EURO 4, EURO 3 and Tier 1 emission regulations and models for high altitude countries