OUTLINE
The 2TR-FE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.
On this engine, the Variable Valve Timing-intelligent (VVT-i) system, Electronic Throttle Control System-intelligent (ETCS-i), and air injection system are used. These control functions have been optimized to further improve engine performance and fuel economy, and to reduce exhaust emissions.
SPECIFICATION
| No. of Cyls. and Arrangement | 4-cylinder, In-line | ||
| Valve Mechanism | 16-valve DOHC, Chain Drive (with VVT-i) | ||
| Combustion Chamber | Pentroof Type | ||
| Manifolds | Cross-flow | ||
| Fuel System | Sequential Multiport Fuel Injection (SFI) | ||
| Ignition System | Direct Ignition System (DIS) | ||
| Displacement | 2694 cm3 (164.4 cu. in.) | ||
| Bore x Stroke | 95.0 mm x 95.0 mm (3.74 in. x 3.74 in.) | ||
| Compression Ratio | 9.6 : 1 | ||
| Max. Output [SAE-NET] | 116 kW @ 5200 rpm*2
118 kW @ 5200 rpm*3 |
||
| Max. Torque [SAE-NET] | 240 N*m @ 3800 rpm*2
241 N*m @ 3800 rpm*3 |
||
| Valve Timing | Intake | Open | 0° to 35° BTDC |
| Closed | 64° to 29° ABDC | ||
| Exhaust | Open | 44° BBDC | |
| Closed | 8° ATDC | ||
| Spark Plug | Manufacturer | DENSO | |
| Type | K20HR-U11 | ||
| Plug Gap | 1.0 mm to 1.1 mm (0.0394 in. to 0.0433 in.) | ||
| Firing Order | 1 - 3 - 4 - 2 | ||
| Research Octane Number | 91 or higher | ||
| Emission Regulation | EURO 4*4 | ||
| EURO 3*5 | |||
| EURO 2*6 | |||
| Engine Service Mass (Reference)*1 | 157 kg (346 lb) | ||
*1: Weight shows the figure with oil and coolant fully filled.
*2: Models compliant with EURO 4 emission regulations
*3: Except models compliant with EURO 4 emission regulations
*4: Models for Chile and SR grade of Central and South America
*5: Deluxe grade for Central and South America and General countries
*6: Models for Colombia, Ecuador, ANCOM and SR grade of General countries
MAIN FEATURES
This engine has been able to achieve the following performance features through the use of the items listed below:
High performance and fuel economy
Low noise and vibration
Lightweight and compact design
Good serviceability
Clean emissions
| Item | (1) | (2) | (3) | (4) | (5) | |
|---|---|---|---|---|---|---|
| Engine Proper | A cylinder head cover made of plastic is used. | - | ○ | ○ | - | - |
| A taper squish shape is used for the combustion chamber. | ○ | - | - | - | ○ | |
| 2 balance shafts are used. | - | ○ | - | - | - | |
| The piston skirt is coated with resin. | ○ | ○ | - | - | - | |
| A No. 1 oil pan made of aluminum alloy is used. | ○ | ○ | ○ | - | - | |
| Valve Mechanism | Timing chains and chain tensioners are used. | ○ | - | ○ | ○ | - |
| Valve lash adjuster assemblies are used. | ○ | ○ | - | ○ | ○ | |
| Valve rocker arm sub-assemblies are used. | ○ | - | - | - | ○ | |
| Intake and Exhaust System | An intake manifold made of plastic is used. | - | - | ○ | - | - |
| A linkless-type throttle body is used. | - | - | ○ | ○ | - | |
| A Three-Way Catalysts (TWCs) are used. | - | - | - | - | ○ | |
| Fuel System | Long nozzle, 12-hole type fuel injector assemblies are used to improve the atomization of fuel. | ○ | - | - | - | ○ |
| Quick connectors are used to connect the fuel hose with the fuel pipe. | - | - | - | ○ | - | |
| Ignition System | Long-reach type spark plugs are used. | ○ | - | - | - | - |
| Serpentine Belt Drive System | A serpentine belt drive system is used. | - | ○ | ○ | ○ | - |
| Engine Control System | The Electronic Throttle Control System-intelligent (ETCS-i) is used. | ○ | - | - | - | ○ |
| The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. | ○ | - | - | ○ | ○ | |
| The Variable Valve Timing-intelligent (VVT-i) system is used. | ○ | - | - | - | ○ | |
| An air injection system is used.* | - | - | - | - | ○ | |
*: Models compliant with EURO 3 and EURO 4 emission regulations