Home › Engine / Hybrid System › 2TR-FBE ENGINE MECHANICAL › ENGINE UNIT
NM1840EF _51 Engine / Hybrid System _010302 2TR-FBE ENGINE MECHANICAL _0055227 ENGINE UNIT GE GENERAL F

2TR-FBE ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 2TR-FBE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.


b.

On this engine, the Variable Valve Timing-intelligent (VVT-i) system, Electronic Throttle Control System-intelligent (ETCS-i), and air injection system are used. These control functions have been optimized to further improve engine performance and fuel economy, and to reduce exhaust emissions.


c.

The following have been achieved by using alcohol fuel as an alternative to gasoline for environmental friendliness:

·

CO and soot in emission gas have been reduced.

·

The amount of sulfur accumulated in the catalytic converter has been reduced because alcohol fuel contains a smaller amount of sulfur. As a result, the durability of the catalytic converter has been improved.




SPECIFICATION


No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with VVT-i)
Combustion Chamber Pentroof Type
Manifolds Cross-flow
Fuel System Sequential Multiport Fuel Injection (SFI)
Ignition System Direct Ignition System (DIS)
Displacement 2694 cm3 (164.4 cu. in.)
Bore x Stroke 95.0 mm x 95.0 mm (3.74 in. x 3.74 in.)
Compression Ratio 12.0 : 1
Max. Output [SAE-NET] 116 kW @ 5000 rpm*2
120 kW @ 5000 rpm*3
Max. Torque [SAE-NET] 245 N*m @ 3800 rpm
Valve Timing Intake Open 0° to 35° BTDC
Closed 64° to 29° ABDC
Exhaust Open 44° BBDC
Closed 8° ATDC
Spark Plug Manufacturer DENSO
Type FK20HR8-G
Plug Gap 0.7 mm to 0.8 mm (0.0276 in. to 0.0315 in.)
Firing Order 1 - 3 - 4 - 2
Fuel Alcohol Fuel*4
Emission Regulation BR-LEV
Engine Service Mass (Reference)*1 161 kg (355 lb)

HINT:

*1: Weight shows the figure with oil and coolant fully filled.

*2: For E22 (22% ethanol)

*3: For E100 (100% ethanol; actually 93% ethanol with water)

*4: Mixed fuel from E22 to E100 is available.


W105077
2.208,4.146 2.594,4.406 0.385,0.26 10 false 1000 2.656,4.146 3.042,4.406 0.385,0.26 10 false 2000 3.104,4.146 3.49,4.406 0.385,0.26 10 false 3000 3.531,4.146 3.917,4.406 0.385,0.26 10 false 4000 3.979,4.146 4.365,4.406 0.385,0.26 10 false 5000 4.448,4.146 4.833,4.406 0.385,0.26 10 false 6000 2.885,4.469 4.229,4.792 1.344,0.323 10 false Engine Speed (rpm) 4.823,0.896 5.26,1.094 0.438,0.198 10 false 130 4.823,1.354 5.26,1.552 0.438,0.198 10 false 110 4.823,1.792 5.26,1.99 0.438,0.198 10 false 90 4.823,2.229 5.26,2.427 0.438,0.198 10 false 70 4.823,2.667 5.26,2.865 0.438,0.198 10 false 50 4.823,3.115 5.26,3.313 0.438,0.198 10 false 30 4.823,3.573 5.26,3.771 0.438,0.198 10 false 10 4.823,3.344 5.26,3.542 0.438,0.198 10 false 20 4.823,2.906 5.26,3.104 0.438,0.198 10 false 40 4.823,2.448 5.26,2.646 0.438,0.198 10 false 60 4.823,2.01 5.26,2.208 0.438,0.198 10 false 80 4.823,1.573 5.26,1.771 0.438,0.198 10 false 100 4.823,1.125 5.26,1.323 0.438,0.198 10 false 120 4.823,3.792 5.26,3.99 0.438,0.198 10 false 0 1.927,1.583 2.25,1.792 0.323,0.208 10 false 260 1.927,1.802 2.25,2.01 0.323,0.208 10 false 240 1.927,2.021 2.25,2.229 0.323,0.208 10 false 220 1.927,2.24 2.25,2.448 0.323,0.208 10 false 200 1.927,2.469 2.25,2.677 0.323,0.208 10 false 180 5.552,2.219 6.104,2.531 0.552,0.313 10 false Output 4.729,0.469 5.115,0.76 0.385,0.292 10 false (kW) 1.917,1.229 2.448,1.583 0.531,0.354 10 false (N*m) 1.271,2.021 1.813,2.313 0.542,0.292 10 false Torque 2.177,0.417 2.969,0.708 0.792,0.292 10 false : For E100 2.177,0.708 2.948,1.021 0.771,0.313 10 false : For E22


MAIN FEATURES


a.

This engine has been able to achieve the following performance features through the use of the items listed below:

i.

High performance and fuel economy


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions

Item (1) (2) (3) (4) (5)
Engine Proper A cylinder head cover made of plastic is used. - ○ ○ - -
A taper squish shape is used for the combustion chamber. ○ - - - ○
2 balance shafts are used. - ○ - - -
The piston skirt is coated with resin. ○ ○ - - -
A No. 1 oil pan made of aluminum alloy is used. ○ ○ ○ - -
Valve Mechanism Timing chains and chain tensioners are used. ○ - ○ ○ -
Valve lash adjuster assemblies are used. ○ ○ - ○ ○
Valve rocker arm sub-assemblies are used. ○ - - - ○
Intake and Exhaust System An intake manifold made of plastic is used. - - ○ - -
A linkless-type throttle body is used. - - ○ ○ -
A Three-Way Catalysts (TWCs) are used. - - - - ○
Fuel System Long nozzle, 12-hole type fuel injector assemblies are used to improve the atomization of fuel. ○ - - - ○
Quick connectors are used to connect the fuel hose with the fuel pipe. - - - ○ -
Ignition System Long-reach type spark plugs are used. ○ - - - -
Serpentine Belt Drive System A serpentine belt drive system is used. - ○ ○ ○ -
Engine Control System The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
The Variable Valve Timing-intelligent (VVT-i) system is used. ○ - - - ○
An air injection system is used. - - - - ○