Home › Engine / Hybrid System › 2TR-FE EMISSION CONTROL › EMISSION CONTROL SYSTEM
NM1840EF _51 Engine / Hybrid System _010310 2TR-FE EMISSION CONTROL _0055235 EMISSION CONTROL SYSTEM GE GENERAL F

2TR-FE EMISSION CONTROL  EMISSION CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Exhaust Emission Control System

i.

2 Three-Way Catalysts (TWCs) are used to reduce emissions in the exhaust gas.


ii.

Based on the signals from the air fuel ratio sensor* and oxygen sensors, the ECM controls the fuel injection volume in order to optimize the emissions in the exhaust gas.


iii.

An air injection system is used.*

*: Models compliant with EURO 3 and EURO 4 emission regulations




b.

Evaporative Emission Control System

i.

The ECM controls the purge flow of evaporative emissions (HC) in the charcoal canister assembly in accordance with engine conditions.