Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM
NM1840EF _51 Engine / Hybrid System _010335 CRUISE CONTROL _0055265 CRUISE CONTROL SYSTEM GE GENERAL F

CRUISE CONTROL  CRUISE CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The cruise control system is controlled by the ECM.


b.

The cruise control system effects control through the ECD system. Once the cruise control system is set to the desired vehicle speed, the fuel injection volume is adjusted automatically to maintain the vehicle speed without depressing the accelerator pedal. The ECM compares the actual vehicle speed and the set speed. If the vehicle speed is higher than the set speed, the ECM decreases the fuel injection volume by regulating the 4 fuel injector assemblies via the injector driver. If the vehicle speed is lower than the set speed, the ECM increases the fuel injection volume by regulating the 4 fuel injector assemblies via the EDU.



PRECAUTION


a.

Observe the following precautions when using the cruise control system:

i.

Turn the ON-OFF button off when the cruise control system is not being used.


ii.

Beware of a possible increase in vehicle speed when driving downhill (if the vehicle speed increases excessively, cancel the cruise control system and shift down to decelerate with the engine brake).


iii.

If the cruise control indicator light blinks while the cruise control system is on, first turn the cruise control system off. Then, turn the cruise control system back on. If the cruise control indicator light continues to blink after performing the above, there may be a malfunction in the system.



b.

Do not use the cruise control system under the following road and vehicle conditions:

i.

Road with heavy traffic


ii.

Steep hills


iii.

Road with sharp bends


iv.

Winding road


v.

Frozen or snowy road


vi.

Slippery road surface


vii.

Towing trailer