OUTLINE
A dry type single plate clutch, operated by hydraulic pressure, is used, which is matched to the performance of each engine.
A clutch disc assembly that uses an organic solvent-free material is used to help protect the environment. In addition, the components of the clutch damper have been optimized to achieve wear resistance and reduce noise and vibration.
A turnover mechanism is used to reduce clutch pedal effort on the models with 1KD-FTV or 2KD-FTV High Version engine.
A clutch accumulator assembly is used to reduce the noise and vibrations that are transmitted to the clutch pedal on the models with 1KD-FTV or 2KD-FTV High Version engine.
SPECIFICATION
| Engine Type | 2TR-FE | 2TR-FBE | |
|---|---|---|---|
| Clutch | Type | Dry Type
Single Plate Clutch Diaphragm Spring |
← |
| Operation | Hydraulic | ← | |
| Clutch Cover | Size | 250 mm (9.84 in.) | ← |
| Installed Load | 5690 N | 5900 N | |
| Clutch Disc | Facing Size* | 250 mm x 160 mm (9.84 in. x 6.30 in.) | ← |
| Master Cylinder | Type | Plunger | ← |
| Release Cylinder | Type | Non-adjustable | ← |
| Clutch Pedal | Conventional | ← | |
| Clutch Accumulator | Without | ← | |
*: Outer diameter x Inner diameter
| Engine Type | 1KD-FTV | 2KD-FTV High Version | |
|---|---|---|---|
| Clutch | Type | Dry Type
Single Plate Clutch Diaphragm Spring |
← |
| Operation | Hydraulic | ← | |
| Clutch Cover | Size | 260 mm (10.24 in.) | 260 mm (10.24 in.)*2
275 mm (10.83 in.)*3 |
| Installed Load | 6700 N | 5800 N*2
7350 N*3 |
|
| Clutch Disc | Facing Size*1 | 260 mm x 172 mm (10.24 in. x 6.77 in.) | 260 mm x 172 mm (10.24 in. x 6.77 in.)*2
275 mm x 175 mm (10.83 in. x 6.89 in.)*3 |
| Master Cylinder | Type | Conventional | Plunger*2
Conventional*3 |
| Release Cylinder | Type | Non-adjustable | ← |
| Clutch Pedal | Turnover | ← | |
| Clutch Accumulator | With | ← | |
*1: Outer diameter x Inner diameter
*2: Models without intercooler
*3: Models with intercooler