OUTLINE
An SD20C type front differential is used on the 4WD models.
A front differential with an Automatic Disconnecting Differential (A.D.D.) shift actuator is used on the models with A.D.D. shift actuator.
A BD20D type rear differential is used.
To suppress wheel spin, a rear differential with Limited Slip Differential (LSD) is used to achieve a high level of traction on rough and slippery roads on the models with LSD.
SPECIFICATION
Front Differential (4WD Models)
| Engine Type | 1KD-FTV | 2KD-FTV High Version | |
|---|---|---|---|
| Transmission Type | A340F | R151F | R151F |
| Differential Gear Ratio | 3.909 | 3.583 | 3.909 |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← | ← |
| Drive Pinion No. of Gear Teeth | 11 | 12 | 11 |
| Ring Gear No. of Gear Teeth | 43 | ← | ← |
| No. of Differential Pinion | 2 | ← | ← |
| Oil Capacity | 1.7 Liters
(1.7 US qts, 1.5 Imp. qts) |
1.5 Liters
(1.5 US qts, 1.3 Imp. qts)*2 1.7 Liters (1.7 US qts, 1.5 Imp. qts)*3 |
← |
| Oil Viscosity | SAE 75W-90 | SAE 85W-90*2
SAE 75W-90*3 |
← |
| Oil Grade | API GL-5 | ← | ← |
| Weight (Reference)*1 | 36.5 kg (80.6 lb) | 34.6 kg (76.3 lb)*2
36.5 kg (80.6 lb)*3 |
← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without A.D.D. shift actuator
*3: Models with A.D.D. shift actuator
| Engine Type | 2TR-FE | 2TR-FBE |
|---|---|---|
| Transmission Type | R150F | A343F |
| Differential Gear Ratio | 4.555 | ← |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← |
| Drive Pinion No. of Gear Teeth | 9 | ← |
| Ring Gear No. of Gear Teeth | 41 | ← |
| No. of Differential Pinion | 2 | ← |
| Oil Capacity | 1.5 Liters (1.5 US qts, 1.3 Imp. qts)*2
1.7 Liters (1.7 US qts, 1.5 Imp. qts)*3 |
1.7 Liters (1.7 US qts, 1.5 Imp. qts) |
| Oil Viscosity | SAE 85W-90*2
SAE 75W-90*3 |
SAE 75W-90 |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 34.6 kg (76.3 lb)*2
36.5 kg (80.6 lb)*3 |
36.5 kg (80.6 lb) |
*1: The figure shown is the weight of the part without fluid.
*2: Models without A.D.D. shift actuator
*3: Models with A.D.D. shift actuator
Rear Differential (TMT Made)
| Engine Type | 1KD-FTV | |
|---|---|---|
| Transmission Type | A340F | R151F |
| Differential Gear Ratio | 3.909 | 3.583 |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← |
| Drive Pinion No. of Gear Teeth | 11 | 12 |
| Ring Gear No. of Gear Teeth | 43 | ← |
| No. of Differential Pinion | 4 | ← |
| Oil Capacity | 3.4 Liters (3.5 US qts, 3.0 Imp. qts) | ← |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)* | 26.7 kg (58.9 lb) | ← |
*: The figure shown is the weight of the part without fluid.
| Engine Type | 2KD-FTV High Version | |
|---|---|---|
| Transmission Type | R151 | R151F |
| Differential Gear Ratio | 3.909 | ← |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← |
| Drive Pinion No. of Gear Teeth | 11 | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| No. of Differential Pinion | 2*2
4*3 |
← |
| Oil Capacity | 3.4 Liters (3.5 US qts, 3.0 Imp. qts) | ← |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 25.7 kg (56.7 lb)*2
26.7 kg (58.9 lb)*3 |
← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
| Engine Type | 2TR-FE |
|---|---|
| Transmission Type | R150F |
| Differential Gear Ratio | 4.555 |
| Ring Gear Size | 205.0 mm (8.07 in.) |
| Drive Pinion No. of Gear Teeth | 9 |
| Ring Gear No. of Gear Teeth | 41 |
| No. of Differential Pinion | 2*2
4*3 |
| Oil Capacity | 3.4 Liters (3.5 US qts, 3.0 Imp. qts) |
| Oil Viscosity | SAE 85W-90 |
| Oil Grade | API GL-5 |
| Weight (Reference)*1 | 25.7 kg (56.7 lb)*2
26.7 kg (58.9 lb)*3 |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
Rear Differential (TASA Made)
| Engine Type | 1KD-FTV | ||
|---|---|---|---|
| Transmission Type | A340F | R151 | R151F |
| Differential Gear Ratio | 3.909 | 3.583 | ← |
| Ring Gear Size | 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3 |
← | ← |
| Drive Pinion No. of Gear Teeth | 11 | 12 | ← |
| Ring Gear No. of Gear Teeth | 43 | ← | ← |
| No. of Differential Pinion | 2*2
4*3 |
← | ← |
| Oil Capacity | 2.5 Liters
(2.6 US qts, 2.2 Imp. qts)*2 3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3 |
← | ← |
| Oil Viscosity | SAE 85W-90 | ← | ← |
| Oil Grade | API GL-5 | ← | ← |
| Weight (Reference)*1 | 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3 |
← | ← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
| Engine Type | 2KD-FTV High Version | |
|---|---|---|
| Transmission Type | R151 | R151F |
| Differential Gear Ratio | 3.909 | ← |
| Ring Gear Size | 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3 |
← |
| Drive Pinion No. of Gear Teeth | 11 | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| No. of Differential Pinion | 2*2
4*3 |
← |
| Oil Capacity | 2.5 Liters (2.6 US qts, 2.2 Imp. qts)*2
3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3 |
← |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3 |
← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
| Engine Type | 2TR-FE | |
|---|---|---|
| Transmission Type | R150 | R150F |
| Differential Gear Ratio | 4.555 | ← |
| Ring Gear Size | 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3 |
← |
| Drive Pinion No. of Gear Teeth | 9 | ← |
| Ring Gear No. of Gear Teeth | 41 | ← |
| No. of Differential Pinion | 2*2
4*3 |
← |
| Oil Capacity | 2.5 Liters (2.6 US qts, 2.2 Imp. qts)*2
3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3 |
← |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3 |
← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
| Engine Type | 2TR-FBE | ||
|---|---|---|---|
| Transmission Type | A343E | A343F | R150 |
| Differential Gear Ratio | 4.100 | 4.555 | 4.100 |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← | ← |
| Drive Pinion No. of Gear Teeth | 10 | 9 | 10 |
| Ring Gear No. of Gear Teeth | 41 | ← | ← |
| No. of Differential Pinion | 4 | ← | ← |
| Oil Capacity | 3.4 Liters
(3.5 US qts, 3.0 Imp. qts) |
← | ← |
| Oil Viscosity | SAE 85W-90 | ← | ← |
| Oil Grade | API GL-5 | ← | ← |
| Weight (Reference)* | 26.7 kg (58.9 lb) | ← | ← |
*: The figure shown is the weight of the part without fluid.