Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL SYSTEM › 2012.04–2012.10
NM1840EF _52 Drivetrain _010349 AXLE AND DIFFERENTIAL _0055281 DIFFERENTIAL SYSTEM GE GENERAL F

AXLE AND DIFFERENTIAL  DIFFERENTIAL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

An SD20C type front differential is used on the 4WD models.


b.

A front differential with an Automatic Disconnecting Differential (A.D.D.) shift actuator is used on the models with A.D.D. shift actuator.


c.

A BD20D type rear differential is used.


d.

To suppress wheel spin, a rear differential with Limited Slip Differential (LSD) is used to achieve a high level of traction on rough and slippery roads on the models with LSD.



SPECIFICATION


a.

Front Differential (4WD Models)

Engine Type 1GR-FE 1KD-FTV
Transmission Type A750F A340F A750F
Differential Gear Ratio 3.583 3.909 ←
Ring Gear Size 205.0 mm (8.07 in.) ← ←
Drive Pinion No. of Gear Teeth 12 11 ←
Ring Gear No. of Gear Teeth 43 ← ←
No. of Differential Pinion 2 ← ←
Oil Capacity 1.7 Liters
(1.7 US qts, 1.5 Imp. qts)
← 1.5 Liters
(1.5 US qts, 1.3 Imp. qts)*2
1.7 Liters
(1.7 US qts, 1.5 Imp. qts)*3
Oil Viscosity SAE 75W-90 ← SAE 85W-90*2
SAE 75W-90*3
Oil Grade API GL-5 ← ←
Weight (Reference)*1 36.5 kg (80.6 lb) ← 34.6 kg (76.3 lb)*2
36.5 kg (80.6 lb)*3

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without A.D.D. shift actuator

*3: Models with A.D.D. shift actuator


Engine Type 1KD-FTV
Transmission Type R151F R156F
Differential Gear Ratio 3.583 ←
Ring Gear Size 205.0 mm (8.07 in.) ←
Drive Pinion No. of Gear Teeth 12 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 2 ←
Oil Capacity 1.5 Liters (1.5 US qts, 1.3 Imp. qts)*2
1.7 Liters (1.7 US qts, 1.5 Imp. qts)*3
←
Oil Viscosity SAE 85W-90*2
SAE 75W-90*3
←
Oil Grade API GL-5 ←
Weight (Reference)*1 34.6 kg (76.3 lb)*2
36.5 kg (80.6 lb)*3
←

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without A.D.D. shift actuator

*3: Models with A.D.D. shift actuator


Engine Type 2KD-FTV High Version
Transmission Type R151F R156F
Differential Gear Ratio 3.909 3.727
Ring Gear Size 205.0 mm (8.07 in.) ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 41
No. of Differential Pinion 2 ←
Oil Capacity 1.5 Liters (1.5 US qts, 1.3 Imp. qts)*2
1.7 Liters (1.7 US qts, 1.5 Imp. qts)*3
←
Oil Viscosity SAE 85W-90*2
SAE 75W-90*3
←
Oil Grade API GL-5 ←
Weight (Reference)*1 34.6 kg (76.3 lb)*2
36.5 kg (80.6 lb)*3
←

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without A.D.D. shift actuator

*3: Models with A.D.D. shift actuator


Engine Type 2TR-FE 2TR-FBE
Transmission Type R150F A343F
Differential Gear Ratio 4.555 ←
Ring Gear Size 205.0 mm (8.07 in.) ←
Drive Pinion No. of Gear Teeth 9 ←
Ring Gear No. of Gear Teeth 41 ←
No. of Differential Pinion 2 ←
Oil Capacity 1.5 Liters (1.5 US qts, 1.3 Imp. qts)*2
1.7 Liters (1.7 US qts, 1.5 Imp. qts)*3
1.7 Liters (1.7 US qts, 1.5 Imp. qts)
Oil Viscosity SAE 85W-90*2
SAE 75W-90*3
SAE 75W-90
Oil Grade API GL-5 ←
Weight (Reference)*1 34.6 kg (76.3 lb)*2
36.5 kg (80.6 lb)*3
36.5 kg (80.6 lb)

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without A.D.D. shift actuator

*3: Models with A.D.D. shift actuator



b.

Rear Differential (TMT Made)

Engine Type 1KD-FTV
Transmission Type A340F R151F R156F
Differential Gear Ratio 3.909 3.583 ←
Ring Gear Size 205.0 mm (8.07 in.) ← ←
Drive Pinion No. of Gear Teeth 11 12 ←
Ring Gear No. of Gear Teeth 43 ← ←
No. of Differential Pinion 4 ← ←
Oil Capacity 3.4 Liters
(3.5 US qts, 3.0 Imp. qts)
← ←
Oil Viscosity SAE 85W-90 ← ←
Oil Grade API GL-5 ← ←
Weight (Reference)* 26.7 kg (58.9 lb) ← ←

HINT:

*: The figure shown is the weight of the part without fluid.


Engine Type 2KD-FTV High Version
Transmission Type R151 R151F
Differential Gear Ratio 3.909 ←
Ring Gear Size 205.0 mm (8.07 in.) ←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 2*2
4*3
←
Oil Capacity 3.4 Liters (3.5 US qts, 3.0 Imp. qts) ←
Oil Viscosity SAE 85W-90 ←
Oil Grade API GL-5 ←
Weight (Reference)*1 25.7 kg (56.7 lb)*2
26.7 kg (58.9 lb)*3
←

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without LSD

*3: Models with LSD


Engine Type 2KD-FTV High Version 2TR-FE
Transmission Type R156 R156F R150F
Differential Gear Ratio 3.727 ← 4.555
Ring Gear Size 205.0 mm (8.07 in.) ← ←
Drive Pinion No. of Gear Teeth 11 ← 9
Ring Gear No. of Gear Teeth 41 ← ←
No. of Differential Pinion 2*2
4*3
← ←
Oil Capacity 3.4 Liters
(3.5 US qts, 3.0 Imp. qts)
← ←
Oil Viscosity SAE 85W-90 ← ←
Oil Grade API GL-5 ← ←
Weight (Reference)*1 25.7 kg (56.7 lb)*2
26.7 kg (58.9 lb)*3
← ←

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without LSD

*3: Models with LSD



c.

Rear Differential (TASA Made)

Engine Type 1KD-FTV
Transmission Type A340F A750F
Differential Gear Ratio 3.909 ←
Ring Gear Size 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3
←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 2*2
4*3
←
Oil Capacity 2.5 Liters (2.6 US qts, 2.2 Imp. qts)*2
3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3
←
Oil Viscosity SAE 85W-90 ←
Oil Grade API GL-5 ←
Weight (Reference)*1 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3
←

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without LSD

*3: Models with LSD


Engine Type 1KD-FTV
Transmission Type R151 R151F R156F
Differential Gear Ratio 3.583 ← ←
Ring Gear Size 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3
← ←
Drive Pinion No. of Gear Teeth 12 ← ←
Ring Gear No. of Gear Teeth 43 ← ←
No. of Differential Pinion 2*2
4*3
← ←
Oil Capacity 2.5 Liters
(2.6 US qts, 2.2 Imp.qts)*2
3.4 Liters
(3.5 US qts, 3.0 Imp. qts)*3
← ←
Oil Viscosity SAE 85W-90 ← ←
Oil Grade API GL-5 ← ←
Weight (Reference)*1 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3
← ←

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without LSD

*3: Models with LSD


Engine Type 2KD-FTV High Version
Transmission Type R151 R151F
Differential Gear Ratio 3.909 ←
Ring Gear Size 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3
←
Drive Pinion No. of Gear Teeth 11 ←
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 2*2
4*3
←
Oil Capacity 2.5 Liters (2.6 US qts, 2.2 Imp. qts)*2
3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3
←
Oil Viscosity SAE 85W-90 ←
Oil Grade API GL-5 ←
Weight (Reference)*1 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3
←

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without LSD

*3: Models with LSD


Engine Type 2TR-FE
Transmission Type R150 R150F
Differential Gear Ratio 4.555 ←
Ring Gear Size 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3
←
Drive Pinion No. of Gear Teeth 9 ←
Ring Gear No. of Gear Teeth 41 ←
No. of Differential Pinion 2*2
4*3
←
Oil Capacity 2.5 Liters (2.6 US qts, 2.2 Imp. qts)*2
3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3
←
Oil Viscosity SAE 85W-90 ←
Oil Grade API GL-5 ←
Weight (Reference)*1 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3
←

HINT:

*1: The figure shown is the weight of the part without fluid.

*2: Models without LSD

*3: Models with LSD


Engine Type 2TR-FBE
Transmission Type A343E A343F R150
Differential Gear Ratio 4.100 4.555 4.100
Ring Gear Size 205.0 mm (8.07 in.) ← ←
Drive Pinion No. of Gear Teeth 10 9 10
Ring Gear No. of Gear Teeth 41 ← ←
No. of Differential Pinion 4 ← ←
Oil Capacity 3.4 Liters
(3.5 US qts, 3.0 Imp. qts)
← ←
Oil Viscosity SAE 85W-90 ← ←
Oil Grade API GL-5 ← ←
Weight (Reference)* 26.7 kg (58.9 lb) ← ←

HINT:

*: The figure shown is the weight of the part without fluid.



d.

Rear Differential (TSAM Made)

Engine Type 1KD-FTV
Transmission Type A340F R151F
Differential Gear Ratio 3.909 3.583
Ring Gear Size 205.0 mm (8.07 in.) ←
Drive Pinion No. of Gear Teeth 11 12
Ring Gear No. of Gear Teeth 43 ←
No. of Differential Pinion 4 ←
Oil Capacity 3.4 Liters (3.5 US qts, 3.0 Imp. qts) ←
Oil Viscosity SAE 85W-90 ←
Oil Grade API GL-5 ←
Weight (Reference)* 26.7 kg (58.9 lb) ←

HINT:

*: The figure shown is the weight of the part without fluid.



e.

Rear Differential (TDV Made)

Engine Type 1GR-FE 2KD-FTV High Version
Transmission Type A750F R151 R151F
Differential Gear Ratio 3.583 3.909 ←
Ring Gear Size 207.0 mm (8.15 in.) ← ←
Drive Pinion No. of Gear Teeth 12 11 ←
Ring Gear No. of Gear Teeth 43 ← ←
No. of Differential Pinion 2 ← ←
Oil Capacity 2.5 Liters
(2.6 US qts, 2.2 Imp. qts)
← ←
Oil Viscosity SAE 85W-90 ← ←
Oil Grade API GL-5 ← ←
Weight (Reference)* 26.0 kg (57.3 lb) ← ←

HINT:

*: The figure shown is the weight of the part without fluid.


Engine Type 2TR-FE
Transmission Type A343E R150 R150F
Differential Gear Ratio 4.555 ← ←
Ring Gear Size 207.0 mm (8.15 in.) ← ←
Drive Pinion No. of Gear Teeth 9 ← ←
Ring Gear No. of Gear Teeth 41 ← ←
No. of Differential Pinion 2 ← ←
Oil Capacity 2.5 Liters
(2.6 US qts, 2.2 Imp. qts)
← ←
Oil Viscosity SAE 85W-90 ← ←
Oil Grade API GL-5 ← ←
Weight (Reference)* 26.0 kg (57.3 lb) ← ←

HINT:

*: The figure shown is the weight of the part without fluid.