OUTLINE
An SD20C type front differential is used on the 4WD models.
A front differential with an Automatic Disconnecting Differential (A.D.D.) shift actuator is used on the models with A.D.D. shift actuator.
A BD20D type rear differential is used.
To suppress wheel spin, a rear differential with Limited Slip Differential (LSD) is used to achieve a high level of traction on rough and slippery roads on the models with LSD.
A rear differential lock actuator is used on the models with rear differential lock system. In the unlikely event that one of the rear wheels loses grip on a surface on which it is difficult to transmit drive torque (such as sand), the rear differential lock can connect the left and right rear wheels, thus ensuring the drive torque of the other wheel and assisting in freeing the vehicle in emergency situations.
The rear differential lock ECU operates the differential lock shift actuator. This causes the rear differential lock system to switch the rear differential between free and lock in accordance with the operation of the rear differential lock switch.
SPECIFICATION
Front Differential (4WD Models)
| Engine Type | 1GR-FE | 1KD-FTV | |
|---|---|---|---|
| Transmission Type | A750F | A340F | A750F |
| Differential Gear Ratio | 3.583 | 3.727*2
3.909*3 |
3.909 |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← | ← |
| Drive Pinion No. of Gear Teeth | 12 | 11 | ← |
| Ring Gear No. of Gear Teeth | 43 | 41*2
43*3 |
43 |
| No. of Differential Pinion | 2 | ← | ← |
| Oil Capacity | 1.7 Liters
(1.7 US qts, 1.5 Imp. qts) |
← | 1.5 Liters
(1.5 US qts, 1.3 Imp. qts)*4 1.7 Liters (1.7 US qts, 1.5 Imp. qts)*5 |
| Oil Viscosity | SAE 75W-90 | ← | SAE 85W-90*2
SAE 75W-90*3 |
| Oil Grade | API GL-5 | ← | ← |
| Weight (Reference)*1 | 36.5 kg (80.6 lb) | ← | 34.6 kg (76.3 lb)*4
36.5 kg (80.6 lb)*5 |
*1: The figure shown is the weight of the part without fluid.
*2: Models with 255/70R15C tires
*3: Except models with 255/70R15C tires
*4: Models without A.D.D. shift actuator
*5: Models with A.D.D. shift actuator
| Engine Type | 1KD-FTV | |
|---|---|---|
| Transmission Type | R151F | R156F |
| Differential Gear Ratio | 3.583 | ← |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← |
| Drive Pinion No. of Gear Teeth | 12 | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| No. of Differential Pinion | 2 | ← |
| Oil Capacity | 1.5 Liters (1.5 US qts, 1.3 Imp. qts)*2
1.7 Liters (1.7 US qts, 1.5 Imp. qts)*3 |
← |
| Oil Viscosity | SAE 85W-90*2
SAE 75W-90*3 |
← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 34.6 kg (76.3 lb)*2
36.5 kg (80.6 lb)*3 |
← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without A.D.D. shift actuator
*3: Models with A.D.D. shift actuator
| Engine Type | 2KD-FTV High Version | |
|---|---|---|
| Transmission Type | R151F | R156F |
| Differential Gear Ratio | 3.909 | 3.727 |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← |
| Drive Pinion No. of Gear Teeth | 11 | ← |
| Ring Gear No. of Gear Teeth | 43 | 41 |
| No. of Differential Pinion | 2 | ← |
| Oil Capacity | 1.5 Liters (1.5 US qts, 1.3 Imp. qts)*2
1.7 Liters (1.7 US qts, 1.5 Imp. qts)*3 |
← |
| Oil Viscosity | SAE 85W-90*2
SAE 75W-90*3 |
← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 34.6 kg (76.3 lb)*2
36.5 kg (80.6 lb)*3 |
← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without A.D.D. shift actuator
*3: Models with A.D.D. shift actuator
| Engine Type | 2TR-FE | 2TR-FBE | |
|---|---|---|---|
| Transmission Type | R150F | A343F | R150F |
| Differential Gear Ratio | 4.555 | ← | ← |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← | ← |
| Drive Pinion No. of Gear Teeth | 9 | ← | ← |
| Ring Gear No. of Gear Teeth | 41 | ← | ← |
| No. of Differential Pinion | 2 | ← | ← |
| Oil Capacity | 1.5 Liters
(1.5 US qts, 1.3 Imp. qts)*2 1.7 Liters (1.7 US qts, 1.5 Imp. qts)*3 |
1.7 Liters
(1.7 US qts, 1.5 Imp. qts) |
← |
| Oil Viscosity | SAE 85W-90*2
SAE 75W-90*3 |
SAE 75W-90 | ← |
| Oil Grade | API GL-5 | ← | ← |
| Weight (Reference)*1 | 34.6 kg (76.3 lb)*2
36.5 kg (80.6 lb)*3 |
36.5 kg (80.6 lb) | ← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without A.D.D. shift actuator
*3: Models with A.D.D. shift actuator
Rear Differential (TMT Made)
| Engine Type | 1KD-FTV | ||
|---|---|---|---|
| Transmission Type | A340F | R151F | R156F |
| Differential Gear Ratio | 3.727*2
3.909*3 |
3.583 | ← |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← | ← |
| Drive Pinion No. of Gear Teeth | 11 | 12 | ← |
| Ring Gear No. of Gear Teeth | 41*2
43*3 |
43 | ← |
| No. of Differential Pinion | 4 | 2*4
4*5 |
4 |
| Oil Capacity | 3.4 Liters
(3.5 US qts, 3.0 Imp. qts) |
← | ← |
| Oil Viscosity | SAE 85W-90 | ← | ← |
| Oil Grade | API GL-5 | ← | ← |
| Weight (Reference)*1 | 26.7 kg (58.9 lb) | 25.7 kg (56.7 lb)*4
26.7 kg (58.9 lb)*5 |
26.7 kg (58.9 lb) |
*1: The figure shown is the weight of the part without fluid.
*2: Models with 255/70R15C tires
*3: Except models with 255/70R15C tires
*4: Models without LSD
*5: Models with LSD
| Engine Type | 2KD-FTV High Version | |
|---|---|---|
| Transmission Type | R151 | R151F |
| Differential Gear Ratio | 3.583*2
3.909*3 |
← |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← |
| Drive Pinion No. of Gear Teeth | 12*2
11*3 |
← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| No. of Differential Pinion | 2*4
4*5 |
2*6
4*7 |
| Oil Capacity | 3.4 Liters (3.5 US qts, 3.0 Imp. qts) | 3.4 Liters (3.5 US qts, 3.0 Imp.qts)*8
2.9 Liters (3.1 US qts, 2.6 Imp.qts)*9 |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 25.7 kg (56.7 lb)*4
26.7 kg (58.9 lb)*5 |
25.7 kg (56.7 lb)*6
26.7 kg (58.9 lb)*5 29.6 kg (65.3 lb)*9 |
*1: The figure shown is the weight of the part without fluid.
*2: 2WD models
*3: 2WD PreRunner models
*4: Models without LSD
*5: Models with LSD
*6: Models without LSD or rear differential lock system
*7: Models with LSD or rear differential lock system
*8: Models without rear differential lock system
*9: Models with rear differential lock system
| Engine Type | 2KD-FTV High Version | 2TR-FE | |
|---|---|---|---|
| Transmission Type | R156 | R156F | R150F |
| Differential Gear Ratio | 3.727 | ← | 4.555 |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← | ← |
| Drive Pinion No. of Gear Teeth | 11 | ← | 9 |
| Ring Gear No. of Gear Teeth | 41 | ← | ← |
| No. of Differential Pinion | 2*2
4*3 |
← | ← |
| Oil Capacity | 3.4 Liters
(3.5 US qts, 3.0 Imp. qts) |
← | ← |
| Oil Viscosity | SAE 85W-90 | ← | ← |
| Oil Grade | API GL-5 | ← | ← |
| Weight (Reference)*1 | 25.7 kg (56.7 lb)*2
26.7 kg (58.9 lb)*3 |
← | ← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
Rear Differential (TASA Made)
| Engine Type | 1KD-FTV | |
|---|---|---|
| Transmission Type | A340F | A750F |
| Differential Gear Ratio | 3.909 | ← |
| Ring Gear Size | 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3 |
← |
| Drive Pinion No. of Gear Teeth | 11 | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| No. of Differential Pinion | 2*2
4*3 |
← |
| Oil Capacity | 2.5 Liters (2.6 US qts, 2.2 Imp. qts)*2
3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3 |
← |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3 |
← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
| Engine Type | 1KD-FTV | ||
|---|---|---|---|
| Transmission Type | R151 | R151F | R156F |
| Differential Gear Ratio | 3.583 | ← | ← |
| Ring Gear Size | 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3 |
← | ← |
| Drive Pinion No. of Gear Teeth | 12 | ← | ← |
| Ring Gear No. of Gear Teeth | 43 | ← | ← |
| No. of Differential Pinion | 2*2
4*3 |
← | ← |
| Oil Capacity | 2.5 Liters
(2.6 US qts, 2.2 Imp.qts)*2 3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3 |
← | ← |
| Oil Viscosity | SAE 85W-90 | ← | ← |
| Oil Grade | API GL-5 | ← | ← |
| Weight (Reference)*1 | 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3 |
← | ← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
| Engine Type | 2KD-FTV High Version | |
|---|---|---|
| Transmission Type | R151 | R151F |
| Differential Gear Ratio | 3.909 | ← |
| Ring Gear Size | 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3 |
← |
| Drive Pinion No. of Gear Teeth | 11 | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| No. of Differential Pinion | 2*2
4*3 |
← |
| Oil Capacity | 2.5 Liters (2.6 US qts, 2.2 Imp. qts)*2
3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3 |
← |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3 |
← |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
| Engine Type | 2TR-FE | |
|---|---|---|
| Transmission Type | R150 | R150F |
| Differential Gear Ratio | 4.555 | ← |
| Ring Gear Size | 207.0 mm (8.15 in.) | 207.0 mm (8.15 in.)*2
205.0 mm (8.07 in.)*3 |
| Drive Pinion No. of Gear Teeth | 9 | ← |
| Ring Gear No. of Gear Teeth | 41 | ← |
| No. of Differential Pinion | 2 | 2*2
4*3 |
| Oil Capacity | 2.5 Liters (2.6 US qts, 2.2 Imp. qts) | 2.5 Liters (2.6 US qts, 2.2 Imp. qts)*2
3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3 |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)*1 | 26.0 kg (57.3 lb) | 26.0 kg (57.3 lb)*2
26.7 kg (58.9 lb)*3 |
*1: The figure shown is the weight of the part without fluid.
*2: Models without LSD
*3: Models with LSD
| Engine Type | 2TR-FBE | |
|---|---|---|
| Transmission Type | A343E | A343F |
| Differential Gear Ratio | 4.100 | 4.555 |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← |
| Drive Pinion No. of Gear Teeth | 10 | 9 |
| Ring Gear No. of Gear Teeth | 41 | ← |
| No. of Differential Pinion | 4 | ← |
| Oil Capacity | 3.4 Liters (3.5 US qts, 3.0 Imp. qts) | ← |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)* | 26.7 kg (58.9 lb) | ← |
*: The figure shown is the weight of the part without fluid.
| Engine Type | 2TR-FBE | |
|---|---|---|
| Transmission Type | R150 | R150F |
| Differential Gear Ratio | 4.100 | 4.555 |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← |
| Drive Pinion No. of Gear Teeth | 10 | 9 |
| Ring Gear No. of Gear Teeth | 41 | ← |
| No. of Differential Pinion | 4 | ← |
| Oil Capacity | 3.4 Liters (3.5 US qts, 3.0 Imp. qts) | ← |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)* | 26.7 kg (58.9 lb) | ← |
*: The figure shown is the weight of the part without fluid.
Rear Differential (TSAM Made)
| Engine Type | 1KD-FTV | |
|---|---|---|
| Transmission Type | A340F | R151F |
| Differential Gear Ratio | 3.909 | 3.583 |
| Ring Gear Size | 205.0 mm (8.07 in.) | ← |
| Drive Pinion No. of Gear Teeth | 11 | 12 |
| Ring Gear No. of Gear Teeth | 43 | ← |
| No. of Differential Pinion | 4 | ← |
| Oil Capacity | 3.4 Liters (3.5 US qts, 3.0 Imp. qts) | ← |
| Oil Viscosity | SAE 85W-90 | ← |
| Oil Grade | API GL-5 | ← |
| Weight (Reference)* | 26.7 kg (58.9 lb) | ← |
*: The figure shown is the weight of the part without fluid.
Rear Differential (TDV Made)
| Engine Type | 1GR-FE |
|---|---|
| Transmission Type | A750F |
| Differential Gear Ratio | 3.583 |
| Ring Gear Size | 207.0 mm (8.15 in.) |
| Drive Pinion No. of Gear Teeth | 12 |
| Ring Gear No. of Gear Teeth | 43 |
| No. of Differential Pinion | 2 |
| Oil Capacity | 2.5 Liters
(2.6 US qts, 2.2 Imp. qts) |
| Oil Viscosity | SAE 85W-90 |
| Oil Grade | API GL-5 |
| Weight (Reference)* | 26.0 kg (57.3 lb) |
*: The figure shown is the weight of the part without fluid.
| Engine Type | 2TR-FE | ||
|---|---|---|---|
| Transmission Type | A343E | R150 | R150F |
| Differential Gear Ratio | 4.555 | ← | ← |
| Ring Gear Size | 207.0 mm (8.15 in.) | ← | ← |
| Drive Pinion No. of Gear Teeth | 9 | ← | ← |
| Ring Gear No. of Gear Teeth | 41 | ← | ← |
| No. of Differential Pinion | 2 | ← | ← |
| Oil Capacity | 2.5 Liters
(2.6 US qts, 2.2 Imp. qts) |
← | ← |
| Oil Viscosity | SAE 85W-90 | ← | ← |
| Oil Grade | API GL-5 | ← | ← |
| Weight (Reference)* | 26.0 kg (57.3 lb) | ← | ← |
*: The figure shown is the weight of the part without fluid.