Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM
NM1840EF _58 Vehicle Interior _010366 LIGHTING (INT) _0055302 LIGHTING SYSTEM CO CONTROL F

LIGHTING (INT)  LIGHTING SYSTEM  CONTROL  ILLUMINATED ENTRY CONTROL  


FUNCTION


a.

When any one of the following conditions is satisfied, the illuminated entry system turns on the key cylinder light assembly, map light assembly and No.1 room light assembly:

i.

Any door is opened.


ii.

Any door is unlocked using the transmitter.



b.

When any one of the following conditions is satisfied, the key cylinder light assembly, map light assembly and No. 1 room light assembly will fade out (within approximately 1 second):

i.

All doors are closed and locked using the transmitter.


ii.

All doors are closed and the ignition switch is turned to ON.


iii.

The lights have remained on for approximately 30 seconds after all doors have been properly closed.