OUTLINE
A manual heater system, manual air conditioning system and automatic air conditioning system are used.
The automatic air conditioning is provided with a partial recirculation system, which improves heating performance.
SPECIFICATION
Performance
| Heater | Heater Output | 5000 W |
| Air Flow Volume | 320 m3/h | |
| Power Consumption | 190 W | |
| Cooler* | Cooling Capacity | 4600 W |
| Air Flow Volume | 470 m3/h | |
| Power Consumption | 230 W |
*: Models with manual air conditioning system and automatic air conditioning system
| Heater | Heater Output | 5000 W |
| Air Flow Volume | 320 m3/h | |
| Power Consumption | 190 W | |
| Cooler* | Cooling Capacity | 4600 W |
| Air Flow Volume | 470 m3/h | |
| Power Consumption | 230 W |
*: Models with manual air conditioning system and automatic air conditioning system
Ventilation and Heater Radiator
| Heater Radiator Unit Sub-assembly | Type | Straight Flow Aluminum-II (SFA-II) |
| Size
W x H x L |
201.5 mm x 150 mm x 21 mm
(7.9 in. x 5.9 in. x 0.8 in.) |
|
| Fin Pitch | 1.8 mm (0.07 in.) | |
| Blower with Fan Motor Sub-assembly | Motor Type | K70-10.5T |
| Fan Type | Semi Shroud Fan | |
| Fan Size
Dia. x H |
155 mm x 65 mm (6.1 in. x 2.6 in.) |
Air Conditioning
| Cooler Condenser Assembly | Type | Multi-Flow-III (MF-III) Sub-cool*1
Multi-Flow-IV (MF-IV) Sub-cool*2 |
| Size
W x H x L |
570 mm x 492.3 mm x 16 mm*1
(22.4 in. x 19.3 in. x 0.6 in.) 620 mm x 440.6 mm x 16 mm*2 (24.4 in. x 17.3 in. x 0.6 in.) |
|
| Fin Pitch | 3.6 mm (0.14 in.)*1
3.55 mm (0.13 in.)*2 |
|
| No. 1 Cooler Evaporator Sub-assembly | Type | Revolutionary Super-slim Structure (RS) |
| Size
W x H x L |
226.1 mm x 241 mm x 38 mm
(8.9 in. x 9.5 in. x 1.5 in.) |
|
| Fin Pitch | 3.0 mm (0.11 in.) | |
| Cooler Compressor Assembly | Type | 10S15*1
10S11*2 |
| Pulley | Magnetic Clutch | |
| Refrigerant | Type | R134a |
| Charge Volume | 450 g |
*1: TASA made
*2: TMT made
MAIN FEATURES
The air conditioning system has the following features:
| Item | Feature |
|---|---|
| Manual and Automatic Common | The following parts are used to ensure high cooling performance while achieving a compact and lightweight construction:
·
Semi-center Location Air Conditioning Unit ·
Revolutionary Super-slim Structure (RS) Evaporator ·
Straight Flow Aluminum-II (SFA-II) Heater Radiator ·
Multi-Flow-III (MF-III) Sub-cool Condenser*1 or Multi-Flow-IV (MF-IV) Sub-cool Condenser*2 |
| Automatic | Defroster control logic is used to improve defroster performance. |
*1: TASA made
*2: TMT made