Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › 2012.04–2012.10
NM1840EF _59 Vehicle Exterior _010376 EXTERIOR PANELS / TRIM _0055314 BODY STRUCTURE GE GENERAL F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  GENERAL  GENERAL  


OUTLINE


a.

Lightweight and Highly Rigid Body

i.

High-strength steel is used in order to achieve excellent body rigidity and a lightweight body.



b.

Safety Features

i.

The impact absorbing structure minimizes cabin deformation by effectively helping to absorb the impact energy in the event of a front or side collision. This provides high performance occupant protection.



c.

Rust-resistant Body

i.

Rust-resistant performance is enhanced by the extensive use of anti-corrosion sheet steel, as well as by an anti-corrosion treatment that includes the application of anti-rust wax and sealer to the easily corroded parts such as the edge of the door lower portion, door hinge, fuel filler lid hinge, hemmed portions of the hood panel and each part of the deck.



d.

Low Vibration and Low Noise Body

i.

Effective application of vibration damping and noise suppressant materials reduces engine, wind and road noise.




MAIN FEATURES


a.

Exterior Design

i.

Front View

1.

The front design has been solidified and a vertical flow is used as a basis to add a touch of sophistication to the original sense of pick-up truck-style toughness, thus achieving an image which is both tough and modern.

2.

An inverted trapezoidal shape is used for the radiator grille and radiator lower grille to give the front view a sophisticated expression.

3.

A protruded outer lens makes the image of the vehicle look strong.

4.

A step at the front turn inner lens is provided for a more sporty look.

5.

Door mirrors with side turn signal light are available to produce a high quality feel on models with door mirror side turn signal light.


V101781
4.344,1.583 3.948,1.198 3.948,1.198 3.781,1.198 true 2.042,1.802 2.698,0.979 2.698,0.979 2.906,0.979 true 1.177,2.385 1.833,3.219 1.833,3.219 2.042,3.219 true 2.792,1.677 3.01,1.458 3.01,1.458 3.104,1.458 true 5.333,1.938 4.24,0.833 4.24,0.833 3.958,0.833 true 6.813,1.375 5.708,0.271 5.708,0.271 5.438,0.271 true 3.656,1.094 3.833,1.24 0.177,0.146 10 false 1. 3.833,0.719 4.01,0.865 0.177,0.146 10 false 4. 2.948,0.885 3.125,1.031 0.177,0.146 10 false 2. 3.135,1.365 3.313,1.51 0.177,0.146 10 false 3. 2.094,3.115 2.271,3.26 0.177,0.146 10 false 2. 5.313,0.167 5.49,0.313 0.177,0.146 10 false 5.


ii.

Rear View

1.

For the rear combination light assembly, a highlighted obi has been placed in the center of the light, taking its coordination with the front design into consideration for a two-part structure. In addition, the hexagonal chamber shape makes the overall appearance stronger.

2.

A Light Emitting Diode (LED) type center stop light assembly with a clear lens is used on the tailgate to ensure visibility when the vehicle is carrying cargo.

3.

A flat type rear bumper is provided as standard equipment in accordance with the grade and specification.


V101469
2.01,1.521 1.563,1.073 1.563,1.073 1.417,1.073 true 2.094,1.76 1.875,1.979 1.875,1.979 1.719,1.979 true 3.625,1.333 4.573,0.385 4.573,0.385 4.781,0.385 true 1.271,0.969 1.448,1.146 0.177,0.177 10 false 1. 4.844,0.271 5.021,0.448 0.177,0.177 10 false 2. 1.563,1.865 1.74,2.042 0.177,0.177 10 false *a 0.073,0.01 0.365,0.229 0.292,0.219 12 false *A:
*A Single Cab Models - -
*a Obi - -


V101468
2.01,1.49 1.563,1.042 1.563,1.042 1.417,1.042 true 2.073,1.76 1.854,1.979 1.854,1.979 1.698,1.979 true 4.865,2.479 5.417,3.021 5.417,3.021 5.677,3.021 true 3.615,1.323 4.563,0.375 4.563,0.375 4.771,0.375 true 1.26,0.927 1.438,1.104 0.177,0.177 10 false 1. 4.823,0.271 5,0.448 0.177,0.177 10 false 2. 5.719,2.917 5.896,3.094 0.177,0.177 10 false 3. 1.521,1.865 1.698,2.042 0.177,0.177 10 false *a 0.073,0.01 0.406,0.24 0.333,0.229 12 false *A:
*A Double Cab Models - -
*a Obi - -



iii.

Side View

1.

A side design with a simple, cylindrical form gives the vehicle a powerful and modern look. A unique J-line detail is applied from the rear deck to the front, resulting in a design that portrays originality.

2.

On models with an over fender (front wheel opening extension sub-assembly, rear No. 1 wheel opening extension sub-assembly), the character line of the over fender has been designed to flow backward to give a fluid image.


V101471
0.046,0.0 0.337,0.217 0.29,0.217 12 *A:
*A Single Cab Models - -


V101472
5.75,2.323 6.292,2.854 6.292,2.854 6.563,2.854 true 2.073,2.323 2.615,2.854 2.615,2.854 2.885,2.854 true 2.104,1.865 1.469,1.229 1.469,1.229 1.188,1.229 true 5.406,1.865 6.042,1.229 6.042,1.229 6.323,1.229 true 0.177,0.167 0.469,0.385 0.292,0.219 12 false *A: 6.604,2.75 6.76,2.906 0.156,0.156 10 false *2 2.917,2.74 3.073,2.896 0.156,0.156 10 false *1 1.042,1.125 1.198,1.281 0.156,0.156 10 false 2. 6.375,1.125 6.531,1.281 0.156,0.156 10 false 2.
*A Double Cab Models - -
*1 Front Wheel Opening Extension Sub-assembly *2 Rear No. 1 Wheel Opening Extension Sub-assembly