FUNCTION
The VVT-i system is designed to control the intake camshaft within a range of 50° (of crankshaft angle) to provide valve timing that is optimally suited to the engine operating conditions. This improves torque in all the speed ranges as well as increasing fuel economy and reducing exhaust emissions.
| *1 | Camshaft Position Sensor (Bank 1) | *2 | Camshaft Timing Oil Control Valve Assembly (Bank 1) |
| *3 | Engine Coolant Temperature Sensor | *4 | Camshaft Timing Oil Control Valve Assembly (Bank 2) |
| *5 | Camshaft Position Sensor (Bank 2) | *6 | Crankshaft Position Sensor |
| *7 | ECM | *8 | Accelerator Pedal Position Sensor |
| *9 | Throttle Position Sensor | - | - |
The VVT-i system delivers excellent benefits in the different operating conditions as shown in the table below:
| Operation State | Objective | Effect | |
|---|---|---|---|
| During Idling |
1.563,1.917 1.885,2.104
0.323,0.188
10
false
BDC
2.51,1 2.833,1.188
0.323,0.188
10
false
IN
0.76,1 1,1.25
0.24,0.25
10
false
EX
1.583,0.094 1.906,0.281
0.323,0.188
10
false
TDC
2.167,0.167 3.167,0.385
1,0.219
10
false
Latest Timing
|
Eliminating overlap reduces blow back to the intake side. | ·
Stabilized idling speed ·
Better fuel economy |
| At Light Load |
1.583,0.083 1.927,0.271
0.344,0.188
10
false
TDC
1.563,1.917 1.938,2.104
0.375,0.188
10
false
BDC
0.771,1 1.083,1.198
0.313,0.198
10
false
EX
2.521,1 2.833,1.198
0.313,0.198
10
false
IN
2.146,0.25 3.167,0.438
1.021,0.188
10
false
To Retard Side
|
Decreasing overlap to reduce blow back to the intake side. | Ensured engine stability |
| At Medium Load |
1.583,0.052 2.042,0.25
0.458,0.198
10
false
TDC
1.563,1.917 2.021,2.115
0.458,0.198
10
false
BDC
2.5,1 2.958,1.198
0.458,0.198
10
false
IN
0.75,1 1.208,1.198
0.458,0.198
10
false
EX
0.521,0.167 1.25,0.5
0.729,0.333
10
false
To Advance Side
|
Increasing overlap to increase internal EGR to reduce pumping loss. | ·
Better fuel economy ·
Improved emission control |
| In Low to Medium Speed Range with Heavy Load |
1.583,0.083 2.042,0.281
0.458,0.198
10
false
TDC
1.552,1.969 2.01,2.167
0.458,0.198
10
false
BDC
2.5,1 2.958,1.198
0.458,0.198
10
false
IN
0.75,1 1.208,1.198
0.458,0.198
10
false
EX
2.25,1.646 2.979,2
0.729,0.354
10
false
To Advance Side
|
Advancing the intake valve close timing for volumetric efficiency improvement. | Improved torque in low to medium speed range |
| In High Speed Range with Heavy Load |
1.583,0.083 2.042,0.281
0.458,0.198
10
false
TDC
1.552,1.969 1.917,2.167
0.365,0.198
10
false
BDC
2.5,1 2.958,1.198
0.458,0.198
10
false
IN
0.75,1 1.208,1.198
0.458,0.198
10
false
EX
0.5,1.625 1.115,2
0.615,0.375
10
false
To Retard Side
|
Retarding the intake valve close timing for volumetric efficiency improvement. | Improved output |
| At Low Temperatures |
1.563,1.917 1.885,2.104
0.323,0.188
10
false
BDC
2.51,1 2.833,1.188
0.323,0.188
10
false
IN
0.76,1 1,1.25
0.24,0.25
10
false
EX
1.583,0.094 1.906,0.281
0.323,0.188
10
false
TDC
2.167,0.167 3.167,0.385
1,0.219
10
false
Latest Timing
|
Eliminating overlap to prevent blow back to the intake side leads to the lean burning condition, and stabilizes the idling speed at fast idle. | ·
Stabilized fast idle speed ·
Better fuel economy |
·
Starting Engine ·
Stopping Engine |
1.563,1.917 1.885,2.104
0.323,0.188
10
false
BDC
2.51,1 2.833,1.188
0.323,0.188
10
false
IN
0.76,1 1,1.25
0.24,0.25
10
false
EX
1.583,0.094 1.906,0.281
0.323,0.188
10
false
TDC
2.167,0.167 3.167,0.385
1,0.219
10
false
Latest Timing
|
Eliminating overlap to minimize blow back to the intake side. | Improved startability |