Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › ENGINE UNIT › from 2012.04
NM1840EF _51 Engine / Hybrid System _010304 1GR-FE ENGINE MECHANICAL _0055229 ENGINE UNIT DE DETAILS F

1GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CAMSHAFT  


CONSTRUCTION


a.

The camshafts are made of cast iron alloy.


b.

In conjunction with the use of the VVT-i system, an oil passage is provided in the intake camshaft in order to supply engine oil to the VVT-i system.


c.

A VVT-i controller has been installed on the front of the intake camshaft to vary the timing of the intake valves.


d.

To detect the intake camshaft position, a timing rotor is provided in front of the VVT-i controller. This timing rotor, which is secured to the intake camshaft, is used by the VVT sensor to detect the actual position of the intake camshaft.

W104357
2.865,0.875 2.656,0.406 2.656,0.406 2.521,0.406 true 5.25,1.813 5.344,1.135 5.344,1.135 5.531,1.135 true 6.083,2.396 6.167,1.688 6.167,1.688 6.313,1.688 true 2.042,1.896 1.781,2.229 1.781,2.229 1.594,2.229 true 2.219,1.969 2.021,2.698 2.021,2.698 1.854,2.698 true 3.833,1.177 3.927,0.531 3.927,0.531 4.104,0.531 true 3.281,2.625 3.01,2.969 3.01,2.969 2.833,2.969 true 3.427,2.656 3.229,3.396 3.229,3.396 3.063,3.396 true 2.375,0.292 2.615,0.521 0.24,0.229 10 false *1 4.135,0.417 4.375,0.646 0.24,0.229 10 false *2 1.427,2.125 1.667,2.354 0.24,0.229 10 false *3 1.688,2.604 1.927,2.833 0.24,0.229 10 false *4 5.563,1.01 5.802,1.24 0.24,0.229 10 false *5 6.354,1.563 6.594,1.792 0.24,0.229 10 false *6 2.677,2.875 2.917,3.104 0.24,0.229 10 false *3 2.906,3.302 3.146,3.531 0.24,0.229 10 false *4
*1 No. 2 Camshaft (Exhaust) *2 No. 1 Camshaft (Intake)
*3 VVT-i Controller *4 Timing Rotor
*5 No. 3 Camshaft (Intake) *6 No. 4 Camshaft (Exhaust)