Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ECD SYSTEM
NM1840EF _51 Engine / Hybrid System _010297 1KD-FTV ENGINE CONTROL _0055222 ECD SYSTEM CO CONTROL F

1KD-FTV ENGINE CONTROL  ECD SYSTEM  CONTROL  PILOT INJECTION CONTROL  


FUNCTION


a.

Pilot injection is a method that provides an auxiliary fuel injection before the main fuel injection takes place. The purpose of pilot injection is to gently start the combustion of the fuel of the main injection in order to reduce combustion noise.

State Pilot Injection Ordinary Injection
Fuel Injection
W112521
0.802,0.604 0.865,0.49 false 1.156,0.604 1.094,0.458 false 0.219,0.615 1.094,0.792 0.875,0.177 8 false Pilot Injection 1.146,0.615 2.021,0.792 0.875,0.177 8 false Main Injection

W112522

Combustion Pressure
W112523

W112524



b.

During pilot injection, the pilot injection volume, timing, and interval (between pilot injection and main injection) are controlled as shown below:

W102252
0.333,1.5 0.698,1.885 0.365,0.385 10 false ECM 4.646,1.5 6.906,1.885 2.26,0.385 10 false Engine Coolant Temperature Sensor 4.844,2.167 6.781,2.552 1.938,0.385 10 false Intake Air Temperature Sensor 5.042,2.833 6.583,3.198 1.542,0.365 10 false Turbo Pressure Sensor 0.708,1.719 2.396,2.406 1.688,0.688 10 false Basic Pilot Injection Timing (Volume, Timing, Interval) 0.729,3.802 2.365,4.49 1.635,0.688 10 false Pilot Injection Timing (Volume, Timing, Interval) 3.615,0.281 5.083,0.667 1.469,0.385 10 false Crank Position Sensor 3.875,0.667 4.813,1.052 0.938,0.385 10 false Engine Speed 6.438,3.813 6.917,4.135 0.479,0.323 10 false Injector 4.677,3.813 5.521,4.188 0.844,0.375 10 false Injector Driver 0.344,0.281 2.479,0.76 2.135,0.479 10 false Accelerator Pedal Position Sensor 2.229,2.583 2.958,2.969 0.729,0.385 10 false Correction