Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › ECD SYSTEM
NM1840EF _51 Engine / Hybrid System _010298 2KD-FTV ENGINE CONTROL _0055223 ECD SYSTEM DE DETAILS F

2KD-FTV ENGINE CONTROL  ECD SYSTEM  DETAILS  SWIRL CONTROL  


OPERATION


a.

The ECM determines the swirl control valve position based on the engine conditions (engine speed and accelerator pedal effort). Then, it switches the vacuum applied to the actuator diaphragm via the VSV, in order to open and close the swirl control valve.


b.

On a cold engine, the ECM fully closes the swirl control valve to reduce the amount of white smoke emissions.


c.

In the low engine speed range, the ECM closes the swirl control valve to strengthen the swirl in the combustion chamber, thus promoting the mixture of fuel and air and stabilizing combustion.


d.

When the engine speed increases to the low or middle-speed range, the ECM fully opens the swirl control valve.

W102873
1.969,2.667 1.969,3.198 1.969,3.198 1.635,3.198 true 2.01,1.698 1.542,2.719 1.542,2.719 1.344,2.719 true 1.25,0.708 1.625,0.708 1.625,0.708 1.625,1.667 true 1.448,1.281 1.448,0.719 true 5.594,0.74 6.729,1.438 1.135,0.698 10 false Accelerator Pedal Position Sensor 5.594,1.917 6.948,2.615 1.354,0.698 10 false Engine Coolant Temperature Sensor 5.594,2.667 7.031,3.365 1.438,0.698 10 false Intake Air Temperature Sensor 5.594,3.406 7.063,3.771 1.469,0.365 10 false Turbo Pressure Sensor 5.594,3.802 7.031,4.5 1.438,0.698 10 false Intake Mass Air Flow Meter Sub-assembly 3.531,2.865 3.917,3.24 0.385,0.375 10 false VSV 5.594,1.542 6.5,1.885 0.906,0.344 10 false Engine Speed 3.219,0.698 4.167,1.063 0.948,0.365 10 false Vacuum Pump 0.115,2.052 1.594,2.417 1.479,0.365 10 false Combustion Chamber 0.115,2.615 1.354,2.979 1.24,0.365 10 false Swirl Control Valve 0.479,0.625 1.24,0.99 0.76,0.365 10 false Intake Port 1.021,3.104 1.615,3.469 0.594,0.365 10 false Actuator 4.531,2.313 4.917,2.677 0.385,0.365 10 false ECM