Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › SFI SYSTEM
NM1840EF _51 Engine / Hybrid System _010295 2TR-FE ENGINE CONTROL _0055220 SFI SYSTEM CO CONTROL F

2TR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  VVT-i CONTROL  


FUNCTION


a.

The VVT-i system is designed to control the intake camshaft within a range of 35° (of crankshaft angle) to provide valve timing that is optimally suited to the engine condition. This improves torque in all the speed ranges as well as increasing fuel economy and reducing exhaust emissions.

W103638
1.76,0.635 1.958,0.833 0.198,0.198 10 false *1 2.427,0.896 2.625,1.094 0.198,0.198 10 false *2 3.792,2.063 3.99,2.26 0.198,0.198 10 false *3 3.823,3.49 4.021,3.688 0.198,0.198 10 false *4 5.292,2.802 5.49,3 0.198,0.198 10 false *5 5.323,3.396 5.521,3.594 0.198,0.198 10 false *6 5.698,3.396 5.896,3.594 0.198,0.198 10 false *7
*1 Camshaft Position Sensor *2 Camshaft Timing Oil Control Valve Assembly
*3 Engine Coolant Temperature Sensor *4 Crankshaft Position Sensor
*5 ECM *6 Intake Mass Air Flow Meter Sub-assembly
*7 Throttle Position Sensor - -


W105539
2.594,0.865 2.385,0.458 2.385,0.458 2.115,0.458 true 1.656,2.938 1.896,2.938 1.896,2.938 2.083,2.656 true 0.646,0.354 2.083,0.667 1.438,0.313 10 false VVT-i Operation Range 0.208,2.833 1.635,3.135 1.427,0.302 10 false VVT-i Operation Range 4.875,1.292 6.688,1.625 1.813,0.333 10 false : Intake valve opening angle 4.854,1.677 6.844,2.01 1.99,0.333 10 false : Exhaust valve opening angle 2.792,0.271 3.156,0.552 0.365,0.281 10 false TDC 2.781,3.365 3.146,3.646 0.365,0.281 10 false BDC 3.146,0.604 3.365,0.823 0.219,0.219 10 false 8° 2.031,0.75 2.323,0.979 0.292,0.229 10 false 35° 1.615,2.365 1.906,2.594 0.292,0.229 10 false 64° 2.167,3.021 2.458,3.25 0.292,0.229 10 false 29° 3.74,2.729 4.031,2.958 0.292,0.229 10 false 44°


b.

The VVT-i system delivers excellent benefits in the different operating conditions as shown in the table below:

Operation State Objective Effect
During Idling
W112525
2.344,0.073 3.333,0.271 0.99,0.198 10 false Latest Timing 1.552,0.125 1.948,0.302 0.396,0.177 10 false TDC 0.76,0.938 1.042,1.083 0.281,0.146 10 false EX 2.51,0.958 2.906,1.135 0.396,0.177 10 false IN 1.542,1.906 1.938,2.083 0.396,0.177 10 false BDC

Eliminating overlap reduces blow back to the intake side.
·

Stabilized idling speed

·

Better fuel economy


At Light Load
W112526
2.042,0.156 3,0.333 0.958,0.177 10 false To Retard Side 1.542,0.115 1.885,0.271 0.344,0.156 10 false TDC 0.719,1.01 0.927,1.167 0.208,0.156 10 false EX 2.51,1.01 2.854,1.167 0.344,0.156 10 false IN 1.521,1.917 1.865,2.073 0.344,0.156 10 false BDC

Decreasing overlap to reduce blow back to the intake side. Ensured engine stability
At Medium Load
W112527
0.51,0.156 1.25,0.5 0.74,0.344 10 false To Advance Side 1.542,0.104 1.844,0.302 0.302,0.198 10 false TDC 2.49,1 2.792,1.198 0.302,0.198 10 false IN 0.75,1 0.969,1.167 0.219,0.167 10 false EX 1.531,1.927 1.969,2.125 0.438,0.198 10 false BDC

Increasing overlap to increase internal EGR to reduce pumping loss.
·

Better fuel economy

·

Improved emission control


In Low to Medium Speed Range with Heavy Load
W112528
2.229,1.625 2.948,2 0.719,0.375 10 false To Advance Side 1.542,0.104 1.875,0.313 0.333,0.208 10 false TDC 0.74,1.01 1.073,1.219 0.333,0.208 10 false EX 2.5,1 2.833,1.208 0.333,0.208 10 false IN 1.521,1.917 1.854,2.125 0.333,0.208 10 false BDC

Advancing the intake valve close timing for volumetric efficiency improvement. Improved torque in low to medium speed range
In High Speed Range with Heavy Load
W112529
0.542,1.646 1.167,2 0.625,0.354 10 false To Retard Side 1.542,0.063 1.917,0.25 0.375,0.188 10 false TDC 2.5,0.896 2.708,1.083 0.208,0.188 10 false IN 0.677,0.917 0.927,1.083 0.25,0.167 10 false EX 1.5,1.979 1.875,2.167 0.375,0.188 10 false BDC

Retarding the intake valve close timing for volumetric efficiency improvement. Improved output
At Low Temperatures
W112525
2.344,0.073 3.333,0.271 0.99,0.198 10 false Latest Timing 1.552,0.125 1.948,0.302 0.396,0.177 10 false TDC 0.76,0.938 1.042,1.083 0.281,0.146 10 false EX 2.51,0.958 2.906,1.135 0.396,0.177 10 false IN 1.542,1.906 1.938,2.083 0.396,0.177 10 false BDC

Decreasing overlap to reduce blow back to the intake side leads to the lean burning condition, and stabilizes the idling speed at fast idle.
·

Stabilized fast idle speed

·

Better fuel economy


·

Starting Engine

·

Stopping Engine


W112525
2.344,0.073 3.333,0.271 0.99,0.198 10 false Latest Timing 1.552,0.125 1.948,0.302 0.396,0.177 10 false TDC 0.76,0.938 1.042,1.083 0.281,0.146 10 false EX 2.51,0.958 2.906,1.135 0.396,0.177 10 false IN 1.542,1.906 1.938,2.083 0.396,0.177 10 false BDC

Decreasing overlap to reduce blow back to the intake side. Improved startability