OPERATION
ECM estimates the ethanol concentration of the fuel in the fuel main tank based on signals from the air fuel ratio sensor. When the engine is stopped, the ECM stores the ethanol concentration in the memory. When the engine is started, the ECM actuates the sub-tank fuel pump and solenoid valves depending on the water temperature and ethanol concentration in the memory to inject the fuel which is in the fuel sub-tank to the intake ports.
Injection volume is determined based on engine coolant temperature and ethanol concentration of the fuel in the fuel main tank.
Two solenoid valves are used for safety: the No. 1 solenoid valve is used for fuel cut-off for the fuel sub-tank; the No. 2 solenoid valve is used for fuel cut-off and injection volume control for the fuel sub-tank. The No. 1 solenoid valve is operated by ON/OFF control, and the No. 2 solenoid valve is operated by duty cycle control.
| *1 | ECM | *2 | FFV Relay |
| *3 | Fuel Sub-tank | *4 | Sub-tank Fuel Pump |
| *5 | Intake Mass Air Flow Meter Sub-assembly | *6 | No. 1 Solenoid Valve (ON/OFF Control) |
| *7 | No. 2 Solenoid Valve (Duty Cycle Control) | *8 | Fuel Jet |
| *9 | Fuel Injector Assembly | *10 | Engine Coolant Temperature Sensor |
| *11 | Air Fuel Ratio Sensor | - | - |