CONSTRUCTION
The cylinder head is made of aluminum alloy. The injector has been located in the center of the combustion chamber in order to improve engine performance and to achieve cleaner emissions.
2 intake ports with different shapes have been combined to promote the mixture of fuel and air by optimizing the swirl in the cylinder.
A vertical 2-stage construction is used for the water jacket to improve cooling performance.
A glow plug is placed between the intake ports of each cylinder to ensure startability.
The passage for the EGR is provided in the cylinder head. By cooling the exhaust gas, it is possible to recirculate a large amount of exhaust gas.
The cylinder head bolt employs plastic region tightening bolts.
| *1 | Injector Hole | *2 | EGR Passage |
| *3 | Glow Plug Hole | *4 | Exhaust Valve Hole |
| *5 | Intake Valve Hole | *6 | Water Jacket |